Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header
via Little Bird
$2.95
SKU LB-LORI-RT
We have 8 units in our Sydney Warehouse available for immediate dispatch.
Description
The Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs.
This Australian made board uses the WS2812B LED (better known as NeoPixels).
This Raspberry Pi HAT has a chain-able design means you can hook up several modules of these RGB LEDs to increase the length of your project. You only need a single micro-controller pin (like on Arduino, Micro:bit or Raspberry Pi Pico) to control as many as you can chain together!
Each Raspberry Pi RGB LED is addressable as it has the driver chip inside the LED.
Each one has 18mA constant current drive so the colour will be very consistent even if the voltage varies.
Each Raspberry Pi RGB LED is addressable as it has the driver chip inside the LED.
Each one has 18mA constant current drive so the colour will be very consistent even if the voltage varies.
The Lorikeet can also be used with Adafruit NeoPixel Libraries.
Not sure where to start? Check out our guides on the Lorikeet with Arduino. Alternatively, you could learn to build a temperature indicator with it and the Raspberry Pi Pico.
This works fantastically with the Loop Cable for Micro:bit. You can hook this up to your micro:bit with the loop cable and have it control all the pretty lights.
This Little Bird Lorikeet is made locally in Sydney, Australia!
Includes:
- 1x Little Bird Lorikeet RGB LED Strip
Specifications:
- 5V input voltage.
- WS2812B(datasheet) - RGB LED
- Single Wire Serial
- 2x 3 pin header - Right Angle
- Dimensions: 9mm (width) x 65mm (height) x 5mm (depth)
