Click or scroll to zoom
Tap or pinch to zoom
We can get 334 units into Australia from DFRobot. If you order today, we can dispatch this stock between Nov 21, 2024 - Dec 08, 2024.
This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 375rpm and the noise is low.
- In order to protect the service life of the motor, do not overload it;
- Do not store and use it in high temperature or extreme humidity, which may affect the service life and effect of the motor;
- When soldering is required on the motor terminals of the positive and negative poles of the power supply, if the soldering iron temperature is between 340 °C ± 40 °C, the heating time should be within 3 seconds to prevent overheating deformation of the plastic parts in the motor;
- Do not let the motor shaft get stuck. If it is stuck, the motor will burn out;
- The motor should be used within the voltage specifications.
SPECIFICATION
- Voltage: 6V
- Direction of rotation: two-way
- Reduction ratio: 1:35
- No-load current: less than or equal to 90mA
- No-load speed: 375rpm
- Load torque: 91g.cm
- Load speed: 160rpm
- Load current: less than or equal to 200
- Stall torque: 0.5kg.cm
- Stall current: 950mA
- Shaft length: 10mm
- Shaft diameter: 3mm D-shaped shaft
- Weight: 25g
- Size: 12*13-R15.5*38mm (without motor output shaft)
