Click or scroll to zoom
Tap or pinch to zoom
We have 363 units in our Sydney Warehouse available for immediate dispatch.
We can get a further 1000 units into Australia from Little Bird. If you order today, we can dispatch this stock between Feb 03, 2025 - Feb 20, 2025.
This PIR sensor is suitable for use with Arduino and Raspberry PI. The 3.3v logic level is very handy as it allows you to use this sensor with 3.3v Arduinos like the Due or Pro Mini as well as 5V like the Uno as 3.3v is still a logical HIGH on a 5v input.
You will still need some 5V available to run the sensor.
Check out our guide on how to use the PIR sensor with the Raspberry Pi!
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
The sensitivity and holding time can be adjusted
Working Voltage Range: DC 4.5V- 20V
Current drain:<60uA
Voltage Output: High/Low level signal:3.3V TTL output
Detection distance: 3--7M(can be adjusted)
FOV: <140°
Delay time: 5-200S(can be adjusted, default 5s +-3%)
Blockade time: 2.5 S (default)
Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
Work temperature:-20-+80°C
