Click or scroll to zoom
Tap or pinch to zoom
Overview
The Raspberry PI GPS add-on lets you used the NEO-6 GPS module with your Raspberry Pi.
GPS data (latitude, longitude and current time) is transmitted to your Raspberry Pi via serial.
This is compatible with the Model B+
We've made instructions on how to use the GPS module with your Raspberry Pi are available here.
Specifications
| PCB size | 58.5mm X 54.6mm X 1.6mm |
| Input voltage | 3.3V |
| Interface | UART |
| Baud rate | 38400 (default) |
Electrical characteristics
| Parameters | Min. | Typical | Max. | Unit |
| Supply voltage | - | 3.3 | 3.6 | VDC |
| Current consumption (average) | - | 40 | - | mA |
Hardware
Pinmap
Raspberry PI interfaces
| Raspberry PI Pin N.O. | Pin name | Pin of GPS Module | Description |
| 11 | GPIO0 | - | Used for Electronic Brick interface |
| 12 | GPIO1 | - | |
| 13 | GPIO2 | - | |
| 15 | GPIO3 | - | |
| 16 | GPIO4 | - | |
| 18 | GPIO5 | - | |
| 22 | GPIO6 | 1PPS | Pulse per second / Electronic brick interface |
| 7 | GPIO7 | EXINT | External interruption pin / Electronic brick interface |
| 3 | SDA0 | - | Electronic brick interface |
| 5 | SCL0 | - | |
| 24 | CE0 | CS | Chip selection for Micro SD card |
| 26 | CE1 | - | Electronic brick interface |
| 19 | MOSI | MOSI | Data input for Micro SD card |
| 21 | MISO | MISO | Data output for Micro SD card |
| 23 | SCLK | SCLK | Clock for Micro SD card |
| 8 | TXD | GPS_RX | Receiving end for SIM900 serial port |
| 10 | RXD | GPS_TX | Sending end for SIM900 serial port |
| 2 | +5V | - | |
| 1 | +3.3V | - | |
| 6 | ND | - |
Indicator
- PWR
Power: When there is normal power supply to the board, the power indicator stays on.
Packing List
- Raspberry Pi GPS Add-on x 1
- Antenna x 1
