RGB LED Module (unassembled Kit)

Name: RGB LED Module (unassembled Kit)
Brand: DFRobot
SKU: DF-DFR0124
Price: 49.08 AUD
Availability: InStock

via DFRobot

$49.08

SKU DF-DFR0124

Quantity

We can get 48 units into Australia from DFRobot. If you order today, we can dispatch this stock between Jan 01, 2025 - Jan 18, 2025.

This Arduino-compatible module uses three TI TLC5940 PWM LED chips to drive a 4x4 array of RGB LEDs. Each color is controlled by a different chip so you can adjust the reference resistors for the appropriate current. The TLC5940 chips are not directly connected to any Arduino pins, but a header is provided for you to make a manual connection depending on the needs of your sketch.

Up to 16 of these modules can be serially connected to make a fantastic LED wall or a LED circle.

It can be directly connected with Arduino via F/M cables. If you want ,you can also connect it to Interface shield through an IDC2x5 cables,and then plug the Interface shield to Arduino.

NOTE: This is a Un-assembled Kit, you need soldering skill to assemble it. A tutorial is available as a reference.

If you feel the assignment of the leds is not good enough, you could assign the LEDs in a custom pattern by wiring to the LED driving holes.

SPECIFICATIONS

Supply Power:DC 5v
RGB LED: common anode
IDC2x5 Serial Data Interface
4x4 array of RGB LEDs
TLC5940 LED driver
16 Channels RGB LED with PWM control
Size:78x45x12mm (3x1.8x0.5'')
Interface:
- D13(SCK)TLC5940 SCLK
- D10(SS) TLC5940 BLANK
- D11(MOSI) TLC5940 SIN
- D9 TLC5940 XLAT
- D3 TLC5940 GSCLK