Features:
1.Banana PI BPI-M1+ is an Open Source hardware platform . Banana PI a dual core, Android 4.4,linux
2.BPI-M1+ have SDIO WiFi module on board and have 40 PIN as rasbperry pi.
3.The Banana Pi BPI-M1+ hardware runs Android, Debian Linux, Ubuntu Linux,OpenSuse linux and images
4.Banana PI BPI-M1+ has a Gigabit Ethernet port and a SATA Socket. It can run with Android 4.4 smoot
5.It can easily run games as it supports 1080P high definition video output. The GPIO is compatible
Hardware Specification of BPi-M1+ |
||
|
Soc |
Allwinner® A20(sun 7i) |
|
|
CPU |
ARM® Cortex™-A7 Dual-Core1GHz (ARM v7 instruction set) |
|
|
GPU |
Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support) |
|
|
SDRAM |
1GB DDR3 (shared with GPU) |
|
|
Power |
5V @ 2A via MicroUSB (DC in Only) and/or MicroUSB (OTG) |
|
|
PMU |
AXP209 |
|
Features |
||
|
Low-level perpherials |
40 Pins Header, 28Ă—GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN,FM-IN,HP-IN. |
|
|
On board Network |
10/100/1000Mbps ethernet (Realtek RTL8211E/D) |
|
|
Wifi Module |
WiFi 802.11 b/g/n |
|
|
Bluetooth |
Optional |
|
|
On board Storage |
MicroSD (TF) card，SATA 2.0 |
|
|
Display |
Supports multi-channel HD display: HDMI 1.4 (Type A - full) LVDS/RGB/CPU display interface (DSI) for raw LCD panels Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out) 11 HDMI resolutions from 640Ă—480 to 1920Ă—1080 plus various PAL and NTSC standards |
|
|
Video |
HD H.264 2160p video decoding Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p@30fps or 720p@60fps encoding |
|
|
Audio outputs |
HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for audio input) |
|
|
Camera |
Parallel 8-bit camera interface |
|
|
Audio input |
On board micphone  |
|
|
USB |
2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip) |
|
| Buttons |
Reset button Power button U-boot button |
|
|
Leds |
Power status led (red) User defined led1 (green) User defined led2 (blue) |
|
|
Other |
IR reciever |
|
Interface definition |
||
|
Sizes |
92 mm × 60mm |
|
|
Weight |
45g |
|
