Utilise affordable and flexible Cat5e/Cat6 cables to join a HDMI source to a display up to 100m away. Doing so with a long HDMI cable can be expensive or result in display issues due to limitations with the HDMI standard. This device makes use of the TCP/IP protocol used for computer networking, so you get the added bonus of being able to split a HDMI signal to multiple displays through a common home router or switch. (requires extra receivers available separately). An IR repeater is built-in allowing full use of your remote control over these long distances.
Features:
* HDMI 1.3, HDCP 1.1 and DVI 1.1 compliant
* Supports Deep Colour up to 12 bits/colour
* Supports IR re-transmitting so remote control can be used
* Frequency bandwidth: 2.25Gpbs (single link)
* Range: 100m
* IR Frequency: 20kHz - 60kHz
* Video support: 480i / 480p / 720p / 1080i / 1080p
* Audio support: LCPM, Dolby True HD & DTS Master Audio, 7.1 compliant
* Equalisation: 8-level digital on RX
* Input: 1 x RJ45, 1 x 3.5mm(IR extender)
* Output: 1 x HDMI, 1 x 3.5mm(IR extender)
* Dimensions: 100(L) x 65(W) x 25(H)mm
Cable range for resolution:
* Cat 5e: 20m, 1080p
* Cat6: 100m, 1080p
| DC Voltage | 5V |
| PSU Powers | Main Product |
| Video Resolution | 1080i |
| HDMI Version | 1.3 |
| Length | 100mm |
| Width | 65mm |
| Height | 25mm |
| Mains Connection Type | Mains AU/NZ 2 Pin (No Earth) |
