Click or scroll to zoom
Tap or pinch to zoom
We can get 482 units into Australia from Jaycar. If you order today, we can dispatch this stock between Nov 30, 2024 - Dec 05, 2024.
The Champion Audio Amplifier Kit with Pre-Amplifier
Refer: Silicon Chip Magazine January 2013
An amplifier and pre-amplifier combination for all those general-purpose audio projects. It uses the AN7511 audio IC to deliver 2W music power into 8 ohms from a 9 to 12V supply. Features low distortion, two inputs (mixed 1:1), over-temperature protection (auto-limiting), Mute and standby control. Pre-amplifier is also suitable for microphones and electric guitars, and can be separated from the amplifier for individual use. Kit supplied with silk-screened PCB, heatsink and PCB mount components.
Features:
* Operating voltage range: 4 - 13.5VDC
* Music power: 3W @ 9 - 12V
* Frequency Response: -2.5dB @ 20Hz, -0.2dB @ 20kHz
* Gain: 34dB for Amplifier, up to 58dB with pre-amplifier
* Input Sensitivity for Amplifier only: 52mV RMS @ 5V, 125mV RMS @ 9 - 12V
* Input Sensitivity for Amplifier & Pre-amplifier: 2mV RMS @ 5V, 5mV RMS @ 9 - 12V
* Quiescent current: 2mA (Pre-amplifier) + 30-60mA (Amplifier)
* Standby current: 2mA (Pre-amplifier) + 1-10uA (Amplifier)
Note: Optional 10kohm potentiometer for external volume control use RP-7610
Refer: Silicon Chip Magazine January 2013
An amplifier and pre-amplifier combination for all those general-purpose audio projects. It uses the AN7511 audio IC to deliver 2W music power into 8 ohms from a 9 to 12V supply. Features low distortion, two inputs (mixed 1:1), over-temperature protection (auto-limiting), Mute and standby control. Pre-amplifier is also suitable for microphones and electric guitars, and can be separated from the amplifier for individual use. Kit supplied with silk-screened PCB, heatsink and PCB mount components.
Features:
* Operating voltage range: 4 - 13.5VDC
* Music power: 3W @ 9 - 12V
* Frequency Response: -2.5dB @ 20Hz, -0.2dB @ 20kHz
* Gain: 34dB for Amplifier, up to 58dB with pre-amplifier
* Input Sensitivity for Amplifier only: 52mV RMS @ 5V, 125mV RMS @ 9 - 12V
* Input Sensitivity for Amplifier & Pre-amplifier: 2mV RMS @ 5V, 5mV RMS @ 9 - 12V
* Quiescent current: 2mA (Pre-amplifier) + 30-60mA (Amplifier)
* Standby current: 2mA (Pre-amplifier) + 1-10uA (Amplifier)
Note: Optional 10kohm potentiometer for external volume control use RP-7610
Assembly required
| Kit Form | Short Form (circuit only) |
| Difficulty | Simple |
| Application Field | Audio Amplifier with Pre-Amplifier |
| PCB Width | 41mm |
| PCB Length | 101mm |
| Estimated Construction Time | 60min |
| Tools required | Soldering Iron |
| Additional optional items | 10kohm potentiometer |
| Audio Device | Amplifier |
| Signal Input Level | 52mV |
| Output power | 3W |
| Audio frequency range | 20Hz-20kHz |
| Audio distortion | 0.25% |
| Signal to noise ratio | 65dB |
| Audio power supply | 3W |
| Audio gain | 34dB |
