WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
We have 1 units in our Sydney Warehouse available for immediate dispatch.
Powered by ESP32 sub controller & Raspberry Pi 4B host controller
The WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating.
- Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque
- A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency
- Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight
- Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.
More Powerful Processor, Richer Multi-Media Capability, Faster Networking
Overall 12-DOF, multi connecting rods leg design + inverse kinematics algorithm,
significantly increasing the servo effective torque
5052 aluminum alloy and PA12 nylon structure materials, 40 sets of bearing joint all over the body,
rugged and reliable structure, ensuring strength while keeping it light weight
Embedded high precision 9-axes motion tracker ICM20948
Accommodating To Different Terrains, keeping the camera stable by self-balancing
allows using OpenCV-based functions like facial recognition, color tracking, motion detection, and more
facial recognition
color tracking
auto-generated WiFi Hotspot on startup, needs no compiling environment configuration,
allows connecting to and login the control page via smartphone or PC browser, without installing app
an Raspberry Pi can be attached as host controller to communicate with the sub controller via UART,
the ESP32 sub controller will share lots of calculating task like connecting rod inverse solving and gait generation, retaining more Raspberry Pi performance for developing high-level functions
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
- The 18650 batteries are NOT included
- Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more
WAVEGO BASIC
- WAVEGO body case x1
- WAVEGO basic parts x1
- Semi-transparent acrylic panel x1
- Double-sided sticker x1
- WAVEGO base board x1
- 2MP camera x1
- 2.4G antenna x1
- 0.91inch OLED display x1
- Micro thrust bearing x14
- Micro ball flange bearing x30
- USB cable (~1m) x1
- Plus screwdriver x1
- Cross wrench sleeve x1
- IPEX 1 to SMA cable (~17cm) x1
- Jumper wire (~20cm) x4
- 4PIN PH2.0 cable x1
- Servo pack x1
- OPTIONS 8.4V 2A battery charger x1
- Screws and standoffs x1
WAVEGO EX
- WAVEGO body case x1
- WAVEGO basic parts x1
- Raspberry Pi extension holder x1
- 5MP wide angle camera x1
- Cooling fan x1
- Semi-transparent acrylic panel x1
- Double-sided sticker x1
- Micro thrust bearing x14
- Micro ball flange bearing x30
- WAVEGO base board x1
- 2MP camera x1
- 2.4G antenna x1
- 0.91inch OLED display x1
- Plus screwdriver x1
- Cross wrench sleeve x1
- 4PIN PH2.0 cable x1
- IPEX 1 to SMA cable (~17cm) x1
- Jumper wire (~20cm) x4
- USB cable (~1m) x1
- Servo pack x1
- OPTIONS 8.4V 2A battery charger x1
- Screws and standoffs x1
WAVEGO PI4 KIT
- WAVEGO body case x1
- WAVEGO basic parts x1
- Raspberry Pi extension holder x1
- 5MP wide angle camera x1
- Cooling fan x1
- Semi-transparent acrylic panel x1
- Double-sided sticker x1
- Micro thrust bearing x14
- Micro ball flange bearing x30
- WAVEGO base board x1
- 2MP camera x1
- 2.4G antenna x1
- 0.91inch OLED display x1
- USB cable (~1m) x1
- Plus screwdriver x1
- Cross wrench sleeve x1
- Servo pack x1
- IPEX 1 to SMA cable (~17cm) x1
- 4PIN PH2.0 cable x1
- Jumper wire (~20cm) x4
- PI4B-4GB x1
- 16GB micro SD card x1
- Copper heatsink x1
- Card reader x1
- OPTIONS 8.4V 2A battery charger + 5V USB-C power supply x1
- Screws and standoffs x1