Introduction:
Makeblock XY-Plotter 2.0 is a updated version of XY-plotter. With the Processing and GRemote, You can draw amazing pictures with Gcode.
Since we reinforce the structure, the XY-plotter 2.0 is stronger enough to be conversed to MiniCNC, 3D printer, driller, etc. And the movement of the terminal is stable and precise since the improved dual-way transmission mechanism.
Features:
- Strong aluminum extrusion parts, anodizing surface
- Two Metal stepper motor with back shaft
- 12V Solenoid include
- Closed type bushing block and ball bushing insert for use in linear motion applications
- Four-bolt aluminum alloy bushing block for a lightweight ready-to-mount installation
- Synthetic resin retainer plate for accurate ball guidance and low noise
- Four rows of recirculating balls inside the ball bushing for smooth running
- Integral lip seals to retain lubricant and protect against contamination
- Round steel shaft for use with slide units in linear motion applications.
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
- Precision ground for consistent ball bushing radial clearance
Note:
With this kit, you can only build a XY-Plotter without controller. You can use your own electronic parts to drive this.
Part List:
|
4 × Linear Motion Shaft D8×480 |
2 x Stepper Motor |
30 × Plastic Rivet 4120 |
|
6 × Linear Motion Slide Unit 8mm |
2 × Stepper Motor Bracket |
25 × Plastic Ring 4x7x2mm |
|
1 × Solenoid-12V |
4 × Timing Pulley 90T |
10 × Plastic Ring 4x8x1mm |
|
2 × Beam 0824-496 |
8 × Timing Pulley Slice 90T |
35 × Screw M4×8 |
|
1 × Beam 0824-144 |
1 × Open-end Timing Belt (3m) |
60 × Screw M4×14 |
|
3 × Beam 0824-128 |
3 × Link Rod |
2 × Srew M4×30 |
|
1 × Beam 0824-96 |
2 × Shaft Connector-4 |
40 × Nylong Lock Nut M4 |
|
3 × Beam 0824-80 |
3 × Threaded Shaft 4×39mm |
20 × Nut M4 |
|
1 × Beam 0808-96 |
3 × Shaft Collar 4mm |
15 × Nylon Cable Ties |
|
1 × General Bracket |
4 × Flange Bearing 4x8x3mm |
1 × Cross Screwdriver |
|
2 × Bracket 3x6 |
8 × Headless Set Screw M3x5 |
1 × Screwdriver 3mm |
|
14 × Bracket 3×3 |
15 × Countersunk Screw M3x8 |
2 × Screwdriver 1.5mm |
|
2 × Plate 3×6 |
|
|
Documents:
The user guide and troubleshooting of XY-Plotter
