Products

The Micro Maestro is the first of Pololu’s second-generation USB servo controllers. The board supports three control methods — USB for direct conne...

SF-ROB-09664

Getting started with the Maestro Servo Controller For a full list of products shown in this video, see the blog post. Overview The Micro Maestro ...

PL-1350

Getting started with the Maestro Servo Controller For a full list of products shown in this video, see the blog post. Overview The Micro Maestr...

PL-1351

Having trouble reading or working on your hobby in fading or poor light? This convenient pocket-size magnifier with super bright LEDs allow...

TB-QM3531

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has t...

DF-FIT0579

INTRODUCTION   This DC gearmotor has an integrated M4*55mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage, t...

DF-FIT0491

This DC gearmotor are now in the status of Pre-order and will ship in the end of Jun. This DC gearmotor has an integrated M3*20mm threaded rod as...

DF-FIT0577

This DC gearmotor has an integrated M3*25mm long rod as its output shaft, turn it into a linear actuator. 6V rated voltage, the no-load speed coul...

DF-FIT0578

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dim...

DF-FIT0467

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dim...

DF-FIT0468

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dim...

DF-FIT0457

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the...

DF-FIT0485

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the...

DF-FIT0484

INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage...

DF-FIT0503

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use. Ratio Speed @ 6V Free...

PI-COM0802

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use. Ratio Speed @ 6V Free...

PI-COM0809

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use. Ratio Speed @ 6V Free...

PI-COM0808

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use. Ratio Speed @ 6V Free...

PI-COM0801

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use. Ratio Speed @ 6V Free...

PI-COM0800

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has...

DF-FIT0302

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has...

DF-FIT0094

These simple little brackets are the best way to securely mount our micro metal gearmotors to your project, whether it be a robot, a fan, or a pull...

PI-COM0803

A lovely little shim to mount on the back of our micro metal gearmotors that provides a male 0.1" push header.Simply solder this board to the back ...

PI-COM0804