Kits

Physical structure Leaflet Title Instructions for FM Mic Kit KJ...

TB-KJ8079

Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it i...

TB-XC4555

Arduino Uno R3 SMD edition. Overview The SparkFun Inventor’s Kit comes with everything you need to start building circuits right out of the ...

PL-2776

Discontinuation notice: This product has been replaced by the SparkFun Inventor’s Kit for Arduino Uno – V3.2, which includes an Arduino Uno R3 ins...

PL-2775

Note: This product has been replaced by the newer SparkFun Inventor’s Kit – V3.2 (with Arduino-Compatible RedBoard). Version 3.2 adds a new Simon ...

PL-2769

Discontinuation notice: This encoder is not compatible with our HPCB micro metal gearmotors (the HPCB motor terminals are too large to fit the cor...

PL-2598

New version available: This product has been replaced by the newer Zumo Robot Kit for Arduino, v1.2 (No Motors), which includes a gyroscope as wel...

PL-2505

Note: This product has been replaced by the newer SparkFun Inventor’s Kit – V3.1 (with Arduino-Compatible RedBoard). SparkFun Inventor’s Kit ...

PL-2190

Discontinuation notice: This product has been discontinued. As an alternative, please consider the SparkFun Inventor’s Kit for Arduino Uno – V3.2,...

PL-2187

Note: This product has been replaced by the newer SparkFun Inventor’s Kit – V3.1 (with Arduino-Compatible RedBoard). The newer version includes a...

PL-2186

Note: This gearbox is now only available in gray. Overview The Tamiya 3-speed crank-axle gearbox is essentially half of the twin-motor gearbox. T...

PL-1681

Note: This gearbox is now only available in gray. Tank-style chassis built using the Tamiya 70100 track and wheel set, Tamiya 70098 universal...

PL-1680

Overview The Tamiya 4-speed crank-axle gearbox has four possible gear ratios, including the highest gear ratio of Tamiya’s gearbox series, 5402:1,...

PL-1679

Note: This gearbox is now only available in gray. Overview The Tamiya single gearbox is essentially half of the Tamiya 70168 double gearbox. The k...

PL-1678

Note: This gearbox is now only available in gray. Tamiya 70168 double gearbox kit – clear. Overview The Tamiya double gearbox is a compact ...

PL-1677

Note: This product has been replaced by the newer SparkFun Inventor’s Kit – V3.1, which includes an Arduino-compatible SparkFun RedBoard and a pla...

PL-1644

Note: This product has been replaced by the newer SparkFun starter kit for RedBoard. Overview The Arduino Duemilanove starter kit from SparkF...

PL-1624

Overview The Orangutan SVP robot controller is a complete control solution for small and medium-sized robots running at 6 – 13.5 V. The modul...

PL-1328

Overview The Orangutan SVP robot controller is a complete control solution for small and medium-sized robots running at 6 – 13.5 V. The modul...

PL-1326

Note: The power adapter included with this kit has changed from the 6W supply in the product picture to a 5W supply (not pictured), and while it c...

PL-1254

Overview This kit includes a round printed circuit board (PCB) with holes spaced on a 0.100" grid, one extended 2×7 male header, two extended 1×2 ...

PL-977

Kits include: Preprogrammed ATtiny13 with tinyCylon firmware Printed circuit board (PCB) 5 red LEDs Pushbutton switch Battery holder wit...

PL-769

This combination of Tamiya parts provides the hardware for two Pololu round robot chassis, plus two motor controllers. The kit includes the f...

PL-764

This combination of Tamiya parts provides the hardware for one Pololu round robot chassis, plus a motor controller. The kit includes the foll...

PL-763

Pre-cut and pre-stripped wires simplify and speed up breadboarding work. Having exactly the right wire lengths for the job also makes your project...

PL-754

Tamiya 58321 Super Clod Buster Kit bottom view. Tamiya 58321 Super Clod Buster Kit front close-up. Tamiya’s Super Clod Buster assembly ki...

PL-735

About the Model This set comes with all the parts you need to build a 2, 4, or 6-legged robot that reacts sounds. Fit the robot with a sound s...

PL-732

Pre-cut and pre-stripped wires simplify and speed up breadboarding work. Having exactly the right wire lengths for the job also makes your project...

PL-347

Build your own little digital keyboard that spans three octaves and has eight voices. This kit does not require soldering, so the only tool you n...

PL-323

Note: This product has been replaced by the Elenco M-1008K Multimeter kit. A digital multimeter (DMM) is one of the most useful tools for any elec...

PL-322

Introduction Assembly of your LP-535 Logic Probe Kit will prove to be an exciting project and give you much satisfaction and personal achievement....

PL-314

This product is discontinued and has been replaced by the next-generation Qik 2s9v1 Dual Serial Motor Controller, which is better in virtually all...

PL-110

The shoulder joint set contains enough parts to connect three Joinmax Digital servos to create a shoulder and elbow joint identical to the one...

PL-92

This servo elbow joint kit allows you to connect two Joinmax Digital servos to create an elbow joint as shown to the right. The same set of p...

PL-91

Note: This product has been replaced by a new Tamiya 70198 Wall-Hugging Mouse and the Tamiya 70195 Wall-Hugging Ladybug. The wall hugging mouse s...

PL-75

Bone conduction is a way of sound transmission. The sound is converted into different frequencies of mechanical vibration, and transmitted through...

DF-KIT0126

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. Th...

SF-KIT-14189

This assortment of tools is great for those of you who are new to soldering. We’ve found our favorite, low-cost tools, and created a kit that we wo...

SF-TOL-13086

This assortment of tools is great for those hackers who need a portable tool assembly with plenty of room to add your own. We’ve found our favorite...

SF-TOL-13055

Be still my beating heart! With the heART Surface Mount Soldering Kit you will be able to learn the basics of SMD soldering by being able to assemb...

SF-KIT-14640

Get a little magical with your soldering skills! The Unigeek is a beginners soldering kit that teaches you the basics of PTH and SMD soldering whil...

SF-KIT-14639

The night is dark and full of terrors, so why not light it up with this handy little night light that will fade up and down depending on how dark t...

SF-KIT-14638

Features: GPIO expansion kits, contains 2 pieces 26-pin GPIO Cable GPIO Extension Board Breadboard is NOT included Raspberry Pi is NOT included Tec...

SU-26-PINGPIOBREAKOUTEXPA

Item specifics Brand Name: SUNFOUNDER Type: Drive IC Condition: New Package Contents 1 x SunFounder Uno R3     1 x USB cable 1 x 400 Point Breadbo...

SU-CUSTOMIZEDKITS

  Technical Details: The kit uses the SunFounder Nano board as control. A SunFounder Servo Control Board integrates battery, servo, Na...

SU-TS0237

Pinball nerds rejoice! The PinBox 3000 is a flippin' fun gamer-maker kit for anyone who loves pinball and DIY. Its sturdy yet customizable construc...

AF-3665