Sensors in New Products

The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and...

SF-SEN-12064

The TSL2561 SparkFun Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum. Unli...

SF-SEN-12055

This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1...

SF-SEN-11824

This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D is a MEMS motion sensor and has a full scale of ±2...

SF-SEN-10612

This tilt sensor can be used to detect multiple orientations. Inside the sensor are infrared emitters which are either reflected or not, depending ...

SF-SEN-10313

This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated...

SF-SEN-08257

Measures distance range: 20 to 150 cm Signal output type: voltage analog signal.   Supply voltage: 4.5 to 5.5 V. Power consumption: 33 mA nominal ...

LB-00321

  Close up of Reed Switch The reed switch invented in 1936 at the Bell Telephone Laboratories is an electrical switch operated by an applied mag...

LB-LR0018

The Sharp GP2Y0A710K0F IR Range Sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 1...

LB-LR0157

With the sound module, we can detect the presence of loud sounds. While this module has a microphone on it, our Arduino does not have the brains to...

LB-LR0240

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive-...

LB-LR0022

What do I get as part of the kit? The Little Bird 45 in 1 Sensor Kit for Arduino was designed for the absolute beginner - no experience required at...

LB-LR20

Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks … but what ...

SF-KIT-13772

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DH...

LB-LR0298

This is a simple small switch which can easily be mounted onto a solderless breadboard. No need for resistors as they are already included on the b...

LB-00331

This extra-long-range SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be use...

AF-1568

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter part...

AF-3686

This spear tip pH sensor/meter kit can directly stab into semisolid material to measure the pH value. It can be used to measure pH value of wet so...

DF-SEN0249

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes ...

AF-1603

This inertial-measurement-unit combines 3 of the best quality sensors available on the market to give you 11 axes of data: 3 axes of accelerometer ...

AF-1604

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not...

SF-SEN-14480

This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated...

AF-1638

This is an Arduino compatible sound level meter(also known as decibel meter, noise meter). It uses instrument circuit, low noise microphone, which...

DF-SEN0232

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the...

AF-1602

This is an Arduino-compatible TDS sensor/Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. It can be applied...

DF-SEN0244

This inertial-measurement-unit combines 2 of the best quality sensors available on the market to give you 9 axes of data: 3 axes of accelerometer d...

AF-1714

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20...

AF-1713

Use this specially modified webcam to analyze plant health, in combination with the Infragram.org image processing tool to measure photosynthesis. ...

AF-1722

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. So far we've carried the very nice MAX31855 which ...

AF-1727

He told you "Go West, young maker!" - but you don't know which way is West! Ah, if only you had this triple-axis magnetometer compass module. A mag...

AF-1746

This cyber-tronic looking sensor hides a secret behind it's glimmering eye. Unlike most temperature sensors, this sensor measures infrared light bo...

AF-1747

This cyber-tronic looking sensor hides a secret behind its glimmering eye. Unlike most temperature sensors, this sensor measures infrared light bou...

AF-1748

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switch...

AF-1766

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are low sensitivity non-directional vibration induced trigger switche...

AF-1767

Remember when you were a kid and there was a birthday party at the pool and your parents totally embarrassed you by slathering you all over with su...

AF-1777

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. We have a couple digital thermocouple amplifiers i...

AF-1778

This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to volta...

AF-1739

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit o...

AF-1733

The Chemical eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with c...

AF-1786

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C...

AF-1782

This small (14mm diameter) piezo element is nicely enclosed so you can attach easily. Piezo elements convert vibration to voltage or voltage to vib...

AF-1740

Face the future with handy illumination. We're proud to carry the first hardware accessory for the Google Glass! Why stick with plain old face-wear...

AF-1848

Laser break beam sensors are usually kind of cumbersome.  They work by detecting an object breaking a laser beam - but you usually have to set up a...

AF-2122

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion ...

AF-1032

This slim and modern potentiometer is small and compact, yet looks good and has a nice feel. We hand selected the best knobs for your project in di...

AF-2058

This slim and modern potentiometer is small and compact, yet looks good and has a nice feel. We hand selected the best knobs for your project in di...

AF-2057

This is really the fanciest, best feeling knob we've ever seen. Using this knob sort of reminded us of driving along the Amalfi coast in a perfectl...

AF-2056