New Products

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while y...

SF-CAB-17495

ResourcesSmart AI Lens kit

EF-EF05045

Protect your Pi 4 in the most retro way possible with this iconic NES-styled case with built in fan. You can even mount a SSD inside the removable ...

PR-NESPI4CASE

The SparkFun RTK Surveyor is an easy to use GNSS receiver for centimeter-level positioning. Perfect for surveying, this preprogrammed device can al...

SF-SPX-17369

Dig out that old Wii controller and use it as a sleek controller for your next robot if you like. The Adafruit Adafruit Wii Nunchuck Breakout Adapt...

AF-4836

So you have a fresh and fancy Teensy 4 and an RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss a...

AF-4828

One of our favorite Feathers, the Feather M4 Express, gets a glow-up here with an upgrade to the SAME51 chipset which has built-in CAN bus support!...

AF-4759

The SmartLED Shield enables the Teensy 4 to drive high-quality graphics to HUB75 RGB LED panels, with 36-bit color and 240 Hz refresh rate across l...

SF-DEV-17521

The M6E-Nano RFID Module delivers a small form factor embedded UHF RFID option with very low power consumption and is ideal for battery operated, l...

SF-SEN-16887

Pycom's WiPy 3.0 – a tiny MicroPython-enabled WiFi & Bluetooth IoT development platform. With a 1KM WiFi range, state of the art Espressif ESP3...

AF-4815

The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your p...

AF-4821

The 3pi+ 32U4 Control Board is designed to be assembled with a 3pi+ Chassis Kit and a pair of 6V Micro Metal Gearmotors with extended motor shafts ...

PL-3735

This chassis gives you everything you need to build your own differential-drive 3pi+ robot based on you own choice of Micro Metal Gearmotors and el...

PL-3725

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a ...

SF-GPS-17285

The new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core. Just like it...

SF-DEV-17544

This is a 5-pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors. It's the same cable that comes ...

SF-CAB-15108

Easy e-paper comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen...

AF-4814

*sniff* *sniff*... do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital nose with the SGP40 Multi-P...

AF-4829

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any ...

AF-4552

If you want to do more with the BBC micro:bit, getting those pins from the card-edge connector is going to be your first hurdle. Unlike many dev-bo...

AF-4792

From the folks at Solder Party comes the Keyboard FeatherWing, an easy way to add a handheld QWERTY keyboard and a 2.6” color display (+ more) to y...

AF-4818

The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4. It is designed for use both as a development system for Compu...

DF-DFR0776

This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4. If a different antenna is used, then separate certification will be r...

DF-FIT0735

Raspberry Pi Compute Module 4 harnesses the computing power of the popular Raspberry Pi 4 Model B, bringing it to a smaller form factor suitable fo...

DF-DFR0772

BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-...

DF-SEN0374

This compact BMX160 9-axis sensor from Bosch Sensortec is an ideal solution for applications that face strict constraints of board space, power con...

DF-SEN0373

This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduin...

DF-SEN0372

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidit...

DF-SEN0375

This patch test hooks can be used in signal and small current connection between main-board and sensor without soldering, which could conveniently ...

DF-FIT0720

This is a newly-introduced Breakout version of BMP388 Sensor from DFRobot with pressure and temperature measurement. It supports Arduino code contr...

DF-SEN0371

We live in a colorful world, but how much do you really know about color? Your eyes may deceive you, while the sensors don’t lie. This Gravity: AS7...

DF-SEN0364

We live in a colorful world, but how much do you really know about color? You eyes may deceive you, while the sensors don’t lie. This AS7341 11-Cha...

DF-SEN0365

This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on hi...

SF-PRT-17546

The BGM220 Explorer Kit from Silicon Labs is an ultra-low cost, small form factor development and evaluation platform for the BGM220P Bluetooth® Mo...

SF-DEV-17588

The Compute Module 3+ Development Kit is made for developing industrial applications with CM3+, CM3+/Lite, CM3, CM3 Lite, and CM1.The Development K...

SF-DEV-17277

The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB LPDDR2 RAM) with 8GB of eMMC Flash...

SF-DEV-17274

The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB LPDDR2 RAM) with 16GB of eMMC Flas...

SF-DEV-17275

The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB LPDDR2 RAM) with 32GB of eMMC Flas...

SF-DEV-17276

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexi...

AF-4612

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexi...

AF-4613

Plug in and glow, this Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs and is 1 meter long, in classy Adafruit Black. It's not ...

AF-4801

Bangle.js is an open, hackable smartwatch that anyone can code for - and best of all it's open source so you don't have to worry about a server get...

AF-4811

These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project. These little PCBs are only 9.1mm x 9.1mm and have ...

AF-4776

The yellow 8BitDo Lite Bluetooth Gamepad is an ultra-portable controller made for 2D games & more. Beyond the compatibility for Windows Machine...

SF-WIG-17265

The blue 8BitDo Lite Bluetooth Gamepad is an ultra-portable controller made for 2D games & more. Beyond the compatibility for Windows Machines,...

SF-WIG-17266

The Himax WE-I Plus EVB Endpoint AI Development Board is the perfect solution for just that; a computer/machine vision or AI endpoint.In collaborat...

SF-DEV-17256

The CH101 from TDK InvenSense is a ToF (time-of-flight) ultrasonic rangefinder with a range of 4 centimeters to 1.2 meters. What sets the CH101 apa...

SF-SPX-17271

The BT-560 antenna is a small, very light weight GNSS/GPS L1/L2 multiband antenna for GPS, GLONASS, Galileo, and BeiDou constellations. Designed fo...

SF-SPX-17383