Pololu Australia

PL-1077

PL-1076

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3334

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3330

PL-1069

USB A to Micro-B cable size comparison: standard cable (#2073) on left, thin cable (#2072) on right. This USB cable is six feet long (1.8 m)...

PL-2073

Overview These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. ...

PL-1013

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-997

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-993

This cable is well suited to serve as an AVR ISP programming cable and is included with our Orangutan USB Programmer, or it can simply serve as a ...

PL-972

Pololu ball caster with 1/2" plastic ball with included hardware. Overview This ball caster kit includes a black ABS housing, a 1/2″ diamete...

PL-952

These universal mounting hubs are designed to work with most 6 mm diameter shafts, including round shafts and “D” shafts. Each of the two include...

PL-1999

Pololu ball caster with 3/8" plastic ball with included hardware. Overview This ball caster kit includes a black ABS housing, a 3/8″ diamete...

PL-950

PL-1960

PL-1957

Overview The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weig...

PL-3126

Overview These M-F (male-female) aluminum standoffs are great for separating stacked components or chassis tiers. Each hexagonal standoff is ...

PL-1940

Note: This crimping tool is 3 mm narrower than our more versatile 0.1-1.0 mm² capacity crimper, and it does not crimp the full extent ...

PL-1929

This Futaba J connector has a 0.1" pin spacing and mates with the female connectors found on many Futaba servos. It is keyed to enforce proper cab...

PL-1927

Overview A-Star 32U4 Prime SV, bottom view. The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR...

PL-3115

This JR connector has a 0.1" pin spacing and is commonly used on RC servos. Two corners are slightly beveled, which makes it difficult (but not i...

PL-1924

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1916

Pre-cut and pre-stripped wires simplify and speed up breadboarding work. Having exactly the right wire lengths for the job also makes your project...

PL-312

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1804