Pololu Australia

Getting started with the Maestro Servo Controller For a full list of products shown in this video, see the blog post. Overview The Micro Maestr...

PL-1351

Wixel programmable USB wireless module, bottom view with US quarter for size reference. The Wixel Configuration Utility with 2 Wixels conn...

PL-1337

Overview CP2104 USB-to-serial adapter carrier, bottom view with dimensions. This USB-to-serial adapter is a breakout board for the Silicon Lab...

PL-1308

Connector This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connect...

PL-2230

Connector This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connect...

PL-2226

Connector This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connect...

PL-2224

Connector This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connect...

PL-2223

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3964

This cable can serve as a generic, 6-conductor ribbon cable with 6×1 0.1" female connectors on both ends, but it is designed for chaining ShiftBri...

PL-1237

Overview The Baby Orangutan is a complete control solution for small robots, all packed into a tiny 1.2" x 0.7" 24-pin DIP package. Its compa...

PL-1220

Overview This current sensor is a carrier board or breakout board for Allegro’s ACS709LLFTR-35BB-T Hall effect-based linear current sensor wit...

PL-2199

Overview This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding...

PL-1207

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3830

5mm Pololu universal aluminum mounting hub on a stepper motor with a 5mm-diameter output shaft. These universal mounting hubs are designed t...

PL-1203

This 12" (300 mm) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single f...

PL-2182

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2180

Overview This current sensor is a carrier board or breakout board for Allegro’s ACS715LLCTR-30A-T Hall effect-based linear current sensor; we ...

PL-1186

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector, sometimes cal...

PL-2172

Overview This kit includes two dual-channel Hall effect sensor boards and two 10-pole magnetic discs that can be used to add quadrature encoding t...

PL-3499

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1143

Overview These sensors are a great way to quickly detect the presence of nearby objects. It consists of a Sharp GP2Y0D805, GP2Y0D810, or GP2...

PL-1134

Overview The LS20031 global positioning system (GPS) receiver module from Locosys receives GPS data on up to 66 channels and outputs the data in...

PL-2138

Overview These sensors are a great way to quickly detect the presence of nearby objects. It consists of a Sharp GP2Y0D805, GP2Y0D810, or GP2...

PL-1132

DRV8824/DRV8825 stepper motor driver carrier with dimensions. Overview This product is a carrier board or breakout board for TI’s DRV8825 st...

PL-2133

This connector is a single-row, 2-pin, extended male header strip. The extra-long pins have a length of 22.85 mm, which is 11.2 mm longer than ty...

PL-1114

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-1100

Note: If you do not need the adjustable functionality of this regulator, we recommend our newer 500 mA D24V5Fx family and 1 A D24V10Fx family of f...

PL-2101

Gearmotor with bracket and hub. These light-weight brackets are specifically designed for Pololu’s 37D mm metal gearmotors. Each bracket fe...

PL-1084

Note: We recommend our newer 500 mA D24V5Fx family and 1 A D24V10Fx family of step-down voltage regulators over this product. They offer similar ...

PL-2097

PL-1067

The HD-1160A is one of our most popular miniature servos. It is an inexpensive, general-purpose actuator for small mechanisms that require a bit ...

PL-1046

Overview These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. ...

PL-1038

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3286

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3285

Details for item #3272 This is a black polyurethane scooter/skate wheel that measures 70 mm in diameter and 25 mm in width. Overview...

PL-3272