Pololu Australia

This 3-piece hex driver set has sockets for 3/16", 1/4", and 5/16" hex nuts or bolts.

PL-1627

Fine-tip soldering iron included with the hot air rework station. Overview This hot air rework station comes with a heat gun, four nozzles, ...

PL-1626

Overview This temperature-controlled, anti-static soldering station with digital readout works with both leaded and lead-free solder. It heats up ...

PL-1625

Note: This product has been replaced by the newer SparkFun starter kit for RedBoard. Overview The Arduino Duemilanove starter kit from SparkF...

PL-1624

Please see the Wixel shield for Arduino product page and the Wixel product page for information about these products and links to related resource...

PL-2514

As of March 1st, 2011, the Logomatic now ships with the MCP73831 battery charger IC instead of the hard-to-find MAX1555. Overview The highly p...

PL-1623

Overview The Wixel shield seamlessly enables a wireless link (with a typical range of ~50 feet) to duplicate the functionality of your Arduino...

PL-2513

Overview The uLog is a tiny analog-logging device with a 3.3V TTL serial interface. Central to the logger is an Atmel ATtiny24 mated with an A...

PL-1622

Note: SparkFun has discontinued this product. We now offer SparkFun’s ADMP401 MEMS microphone breakout board Ready to add sound detection to...

PL-1621

Ready to add sound detection to your next project? This compact breakout board from SparkFun couples a small electret microphone with a 100x ...

PL-1620

ISD1932 voice recorder carrier top view. ISD1932 voice recorder carrier bottom view. Overview This breakout board from SparkFun is a carr...

PL-1619

Overview This tiny microphone board from SparkFun is a carrier for Analog Devices’ ADMP401 Omnidirectional Microphone with Bottom Port and Analog ...

PL-1618

Note: This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator. Overview The MPL115A1 MEMS digit...

PL-1617

New version available: This product has been replaced by the RN-41 Bluetooth Module Carrier. This product has firmware version 4.77. The replace...

PL-1613

Overview This is a breakout board from SparkFun for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703...

PL-1612

Overview The Parallax BASIC Stamp Discovery Kit contains everything you need to get started with microcontroller programming and electronics, incl...

PL-1611

Zumo Shield for Arduino, v1.2, with included through-hole components installed. Overview The Zumo Shield is designed specifically to be a...

PL-2508

Overview The Scribbler 2 Robot (S2) is pre-programmed with eight demo modes, including light-seeking, object detection, object avoidance, and line...

PL-1610

ColorPAL side view. Overview The ColorPAL from Parallax is a miniature color and light sensor that can double as a color generator with its ...

PL-1608

This product has been discontinued. Please see our Wall-Adapter Power Supply – 9VDC 650mA for a replacement. Key Specifications: Power requirem...

PL-1607

If you need a serial port on your computer but you don’t have one, this USB to serial (RS-232) adapter is an easy solution. To use the adapter...

PL-1606

Parallax’s PING))) Ultrasonic Sensor provides a very low-cost and easy method of distance measurement. This sensor is perfect for any number of ap...

PL-1605

New version available: This product has been replaced by the newer Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors), which includes a ...

PL-2506