Pololu Australia

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1866

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3065

Overview The Pololu dual high-power motor drivers are compact carriers for the VNH3SP30 and VNH2SP30 motor driver integrated circuits from ST....

PL-707

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1865

Overview Pololu High-Current Motor Driver Carrier pinouts and dimensions. This module is a compact breakout board for ST’s high-power VNH2SP...

PL-706

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3064

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1864

Overview Pololu High-Current Motor Driver Carrier pinouts and dimensions. This module is a compact breakout board for ST’s high-power VNH2SP...

PL-705

Pololu’s new IR beacon (infrared beacon) is an updated version of our original IR beacon. Like the original unit, the devices are transceiver...

PL-704

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1863

Pololu’s new IR beacon (infrared beacon) is an updated version of our original IR beacon. Like the original unit, the devices are transceiver...

PL-702

Pololu’s new IR beacon (infrared beacon) is an updated version of our original IR beacon. Like the original unit, the devices are transceiver...

PL-701

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1862

High-Traction Sticky Tire on Futaba servo wheel. These high-traction sticky tires (also known as gummy tires) are a great way to give additi...

PL-694

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3062

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1861

The GM10W wheel is made to match the Solarbotics GM10 Geared Pager Motor. This small plastic robot wheel is molded from ABS, and it measures just ...

PL-689

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3061

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1860

The provided mounting holes in the Solarbotics GM3 and GM9 gear motors are a convenient way to mount the motors to your project, but sometimes...

PL-603

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1859

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3060

This hard plastic wheel is specially designed for the Solarbotics GM2, GM3, GM8, and GM9 gear motor output shafts. It also fits on Pololu plastic ...

PL-601

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1858

We use these motor drivers in several of our products, including the single and dual motor driver carrier boards, the jrk 12v12 motor controller w...

PL-537

Parallax (Futaba S148) continuous rotation servo. Overview The Parallax (Futaba S148) continuous rotation servo converts standard RC servo p...

PL-536

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3059

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1857

The Pololu USB-to-serial adapter is great for connecting microcontroller projects to a personal computer. The adapter uses 3.3 V signal levels so...

PL-391

Overview This little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. It is i...

PL-356

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1856

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3058

Pre-cut and pre-stripped wires simplify and speed up breadboarding work. Having exactly the right wire lengths for the job also makes your project...

PL-354

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1855