Cables in Prototyping

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (100mm) long and come in a 'strip' of 40 (...

LB-00160

40 pin 15CM Jumper wire F/FHandy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 150mm long and com...

LB-00162

40 pin 15CM Jumper wire M/FHandy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 150mm long and com...

LB-00161

40 pin 30CM Jumper wire 

LB-LR0293-11

This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various length...

SF-PRT-00124

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you w...

SF-PRT-11026

The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi board — luck...

SF-PRT-14272

Breadboard jumper wire 65 pcs pack (Male to Male header). Including 4 different length:200mm,165mm,125mm and 80mm.A must have component for breadb...

DF-FIT0010

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1903

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1900

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output)...

AF-1988

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1902

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1901

An assortment of colored wires: you know it’s a beautiful thing. Six different colors of solid core wire in a cardboard dispenser box. Sit this on ...

SF-PRT-11367

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look ...

SF-CAB-10646

This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable ...

DF-FIT0154

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. Y...

AF-1008

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1801

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look ...

SF-CAB-10649

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any ...

SF-PRT-09140

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of allig...

AF-3255

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 3, 2, and B+ so you can easily connect to the low-level peripherals and get h...

SF-CAB-13028

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1992

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connector...

PL-1800