Jumper Leads in Prototyping

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3810

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3809

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3806

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3805

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3804

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3802

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3800

These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the other. Each wire is 3 fee...

SF-CAB-14166

This simple 24AWG wire is terminated with a male JST connector at one end and a male JST-SM connector at the other. Each wire is a foot long and is...

SF-CAB-14165

This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a ...

SF-CAB-14043

This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin...

SF-PRT-13164

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a...

SF-COM-12096

This 0.005" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a...

SF-COM-12095

This 0.012" Muscle Wire® (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific am...

SF-COM-11900

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of st...

SF-PRT-11710

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stran...

SF-PRT-11709

This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking! This ...

SF-CAB-11489

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10372

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10369

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends....

SF-PRT-10366

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10364

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10362

This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it’s better...

SF-PRT-09923

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spac...

SF-PRT-09918

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bar...

SF-PRT-09916

The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe to either a BNC jack, R...

SF-CAB-09486

This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board...

SF-PRT-09390

This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board...

SF-PRT-09389

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. ...

SF-PRT-09388

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on a...

SF-PRT-09386

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on a...

SF-PRT-09385

This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 pack...

SF-PRT-09194

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions...

SF-PRT-08671

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions...

SF-PRT-08670

This is a simple two wire cable. One end has a 2 pin female 0.1" pitch connector. Opposite end has 2-pin JST connector. Dimensions: 130mm Documen...

SF-PRT-08599

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, 2-pin Molex 0.1" pitch polarized connector ...

SF-PRT-08598

Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08026

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with...

SF-CAB-00508

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pai...

SF-CAB-00507

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1755

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3300

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3302

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3306

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3309

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3310