Hats & Phats in Raspberry Pi, Kits, HATs, and Accessories

A high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with optional capacitive multi-touch! HyperPixel 4.0 is the perfect way to use...

PR-PIM369

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!We've pulled together a great set of features into thi...

PR-PIM213

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/...

PR-PIM368

The Black HAT Hacker in bijou form. It's Pico HAT Hacker!Pico HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It...

PR-PIM300

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. Th...

PI-COM2100

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/...

PR-PIM299

Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pa...

PR-PIM082

Specifically selected for Pi HATs and pHATs this standoff selection also includes male to female standoffs to allow you to stack your boards secure...

PI-COM2101

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2 or Pi 3 (any Pi with a 2x20 connector) with this jau...

AF-2310

The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volum...

PI-IQA001

Add a tiny yet convenient power switch to your Pi with OnOff SHIM!Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be...

PR-PIM269

A high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with optional capacitive multi-touch! HyperPixel 4.0 is the perfect way to use...

PR-PIM370

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling Servo Motors - these motors need very specific ...

AF-3416

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss.Pan-Tilt HA...

PR-PIM183

Power over Ethernet (PoE) can make your project wiring a breeze - instead of needing a wire for power and data, you can use one Ethernet cable for ...

AF-3953

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an offi...

AF-3346

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it...

AF-2348

If you'd like a compact display, with buttons and a joystick - we've got what you're looking for. The Adafruit 128x64 OLED Bonnet for Raspberry Pi ...

AF-3531

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio!This pHAT provide...

PR-PIM138

We've stepped up our LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness!You can st...

PR-PIM273

The HIFI DAC expansion board designed for the Raspberry Pi (Pi 2/3/B +). The user can use this expansion board with audio playback systems to build...

LB-LS0657

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping ...

AF-2336

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's har...

AF-2187

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/...

PR-PIM367

This diffuser will give your pHAT lovely bokeh! Cut from the finest frosted perspex, this little diffusion layer will soften the lights from your S...

PR-PIM309

Power your Pi with a wide range of input voltages from 3 to 16V!Wide Input SHIM lets you use a range of different power supplies with your Pi, incl...

PR-PIM271

What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn pHAT. Sporting a matrix ...

PR-PIM168

Need to attach some electronic components or sensors to your Raspberry Pi? PiBreak is a prototyping board for the Raspberry Pi. It provides labelle...

FT-PIBR

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-ter...

AF-2711

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U!This is a 4-port USB hub for ...

AF-3298

You can now create a dazzling display with your Raspberry Pi with the Adafruit RGB Matrix Bonnet. These boards plug into your Pi and makes it supe...

AF-3211

Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to ...

PR-PIM377

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog i...

PR-PIM181

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspbe...

SF-DEV-14459

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch over...

AF-2441

An unashamedly old school LED matrix display board, made up of six LED matrices each 5x7 pixels (for an effective display area of 30x7) plus a deci...

PR-PIM182

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 L...

PR-PIM254

Great for including a colourful character display and button inputs on your Raspberry Pi based projects! Includes a 16x3 character LCD display, 6-z...

PR-PIM113

Add some easy-listenin' tunes to your Raspberry Pi using this basic audio bonnet. It'll give you stereo line out from a digital I2S converter for a...

AF-4037

Pimoroni's Pico HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a super-skinny 0.8mm PCB, so you can solder...

AF-3577

Unlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!Piano HAT is inspired by Zachary Igielman's PiPiano and mad...

PR-PIM095

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface...

PR-PIM400

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 ...

PI-RPI-005

Pocket-sized fun is the name of this game, with the Joy Bonnet – our most fun Bonnet ever (no we didn't even think that was possible, either!). Thi...

AF-3464

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overl...

AF-2298

The latest Raspberry Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrad...

AF-4074

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connec...

SF-DEV-14328

Easily connect the 128x128 Pixel OLED Module to your Raspberry Pi using this handy expansion board. It even includes breakouts for Raspberry Pi I/...

FT-PISC