Robotics

Clockwise/anticlockwise pair of spare motors for GT4125 2.4GHz Drone with 720p Camera. Specifications Warranty: 12 ...

TB-GT4127

  Spare motor mount for the Crazyflie Nano Quadcopter.   Specification Weight: ~0.21g Plastic: PP   Pack list 4 x Motor mount   S...

SS-110990152

Each Supercar is a self-aware robot, driven by powerful artificial intelligence (A.I.) and equipped with deadly strategy.Guardian’s Siren Core keep...

MG-000-00044

Have you heard the story of how our other Zinc plated nuts come only from some sort or “metal tree” or how their dimensional variations can only be...

SF-PRT-12917

A 25mm diameter dc motor, together with a motor bracket, a shaft connector and a multipurpose wheel.   Specification Rated Voltage: 6V (Volt...

SS-110990128

Do you need to precisely dispense amounts of liquid for your preferred beverage? If so this could be the pump for you. This is the Bartendro Dispen...

SF-WIG-12915

This Kit contains a Makeblock high torque(15kg.cm) digital servo and 2 servo bracket, with these bracket, it's easy to build a joint for a robot,...

SS-110990112

This D65 wheel set is Discontinued Now, We recommend other best selling Wheels and Casters as a suitable replacement. This wheel set including...

DF-KIT0014-S

This wheel set including a pair Red of D65mm rubber wheels, two specific adapters and two micro DC geared motors. They are commonly used in o...

DF-KIT0014-R

This D65 wheel set - Blue is Discontinued Now, We recommend other best selling Wheels and Casters as a suitable replacement. This wheel set in...

DF-KIT0014-B

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on th...

SF-ROB-12859

Do the CNC electric-slide! To the left, now to the right. Now you have no excuse for not building that CNC robot. This supported 12mm diameter slid...

AF-1851

This is a Gripper Kit w/ Servo from Lynxmotion. This precise gripper is made from PVC with fingers 1/3 of the height of the Little Grip. The gri...

DF-ROB0078

Make your robot or CNC move on our Aluminum Slide Rail with this sliding linear ball-bearing platform AKA pillow block. The slider is 39mm x 36mm a...

AF-1183

Ever wanted to feel like Magneto? Well, now you sort-of can! Bring the ferromagnetic objects in the world under your control with an ElectromagnetT...

AF-3873

Creativity, design-thinking, and artistic skills are the foundation of innovation. With the Air Piano Extension Kit, students will have the opportu...

AS-E300-PIANO

This is a very small FM transmitter. Designed to be the building block of wireless microphones and MP3 broadcasters, this small module requires onl...

SF-WRL-08452

To navigate terrain inaccessible by the wheel, students learn the concept of kinetic energy through limbed mobility. The insect limbed robot extens...

AS-E300-INSECT

Make your robot or CNC move on our 15mm Supported Slide Rail with this sliding ball-bearing platform. The slider is 60mm x 35mm and has four holes ...

AF-1860

Do the CNC electric-slide! To the left, now to the right. Now you have no excuse for not building that CNC robot. This is a 'supported style' 15mm ...

AF-1861

Make your robot or CNC move on our 15mm Supported Slide Rail with this sliding ball-bearing platform. The slider is a bit larger than the other sli...

AF-1866

mBot is a low cost, easy-to-run robot kit for kids to get hands-on experience about graphical programming, electronics, robotics. It is an all-in-o...

SS-110090039

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing...

DF-FIT0256

mBot is a low cost, easy-to-run robot kit for kids to get hands-on experience about graphical programming, electronics, robotics. It is an all-in-o...

SS-110090038

This is the Exofabulatronixx 5200 MOSS Ultimate Kit, an incredibly fun kinematic robot construction system from Modular Robotics. Exofabulatronixx ...

SF-KIT-12778

Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example...

DF-FIT0257

The Renbotics ServoShield is an Arduino-compatible shield that uses two 4017 decade counters to drive up to 16 servos using only 4 pins (digital p...

SS-110090001

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing...

DF-FIT0258

These capacitors are designed to replace the original capacitor that has failed. You must replace the part as the motor may simply not work...

TB-RU6604

This light and sturdy bracket is specifically designed for Pololu’s 37D mm metal gearmotors. Nine 8 mm M3 screws are included for securing the mo...

PL-1995

Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example...

DF-FIT0284

Shape Memory metals were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,ther...

DF-FIT0260

1/4″ Pololu universal aluminum mounting hub on a NEMA 23 stepper motor with 1/4″-diameter output shaft. These universal mounting hubs are de...

PL-1993

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12747

This is another DFRobot customized high quality product. It is a simple 2 phases hybrid stepper motor. It features 3.5kg high torque output. I...

DF-FIT0278

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12746

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12745

Sizes These cylindrical spacers are available in different sizes:

PL-1988

Sizes These cylindrical spacers are available in different sizes:

PL-1987

This is a 5mm (0.2") to 8mm (0.31") Aluminum coupler. A common application for this coupler is to connect a stepper motor with a 5mm (0.2") axis...

DF-FIT0248

Sizes These cylindrical spacers are available in different sizes:

PL-1983

These are 8mm (0.31") copper sleeves that will slide perfectly onto 8mm (0.31") rods. Perfect for your 3D printer prototyping needs! S...

DF-FIT0233

Sizes These cylindrical spacers are available in different sizes:

PL-1979

These are 8mm (0.31") ball bearings. They will fit on 8mm (0.31") rods.​ SPECIFICATIONS Model:688zz Inner diameter:8mm (0.31"...

DF-FIT0238

Sizes These cylindrical spacers are available in different sizes:

PL-1975

Sizes These cylindrical spacers are available in different sizes:

PL-1974

Sizes These cylindrical spacers are available in different sizes:

PL-1973