Seeed Studio Australia

The 13.56MHz RFID book tag can be used in the identification of books. And it can be read by almost any 13.56MHz RFID/NFC reader like the 13.56MHz...

SS-113990015

Seeeduino Lite shares many similarities with Arduino Leonardo. It is a microcontroller board based on Atmega32U4 chip. The chip has about the sam...

SS-102010008

In the pursuit for small form factor, flexibility and functionality comes Seeeduino Mega – derived from Arduino Mega it harnesses the power of ATm...

SS-102010007

Model: FM1108 IC S50   ● Resonance Frequency: 13.56MHZ ● Memory: 8K Bit EEPROM memory ● Operating temp.range: -10°C - 50°C  

SS-113990013

M1 RFID Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag...

SS-113990012

The Rainbowduino board (V3.0) is an Arduino compatible controller board with professional multiplexed LED driver. It can drive a 8x8 RGB Led Matr...

SS-102010006

DISCONTINUED: This product has been discontinued, the page is available for reference and documentation.     This module based on Nordic nRF24L0...

SS-113990011

 This product is discontinued, please consider the upgraded Seeeduino Stalker v3 as an alternative product.   Seeeduino Stalker is a feature...

SS-102010005

The kit is consisted of transmitter and receiver, popular used for remote control.   Basic Specification:  Frequency: 433Mhz. Modulation: ASK R...

SS-113990010

Seeeduino is Arduino compatible board. Based on Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs. On the hardware p...

SS-102010004

This ZigFlea board is a wireless transceiver "shield" for the CUI32Stem. Based on the Freescale MC13201 transceiver, which supports the IEEE 802....

SS-113990009

Flyport GPRS Kit is a clever gadget attributed to openPicus. It integrates excellent abilities as GPRS data exchange, instant Grove access and da...

SS-113990008

An artistic Arduino compatible microcontroller!   Clio is a complete Arduino compatible microcontroller. The former comparatively rigid PCBs a...

SS-102010003

Seeeduino Film is no longer provided tought we have some stock of Seeeduino Motion Frame, we suggest try Xadow Series for wearable projects. ...

SS-102010002

The WireFree BoosterPack allows you to connect the HC-05 or HC-06 bluetooth chips to the Launchpad. The primary interface for this chip is via se...

SS-113990007

Atom Node is a IoT platform, which intellectualize its surroundings. Atom Node can support serveral Grove sensors and actustors to gather physic...

SS-102010001

XBee Wi-Fi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless devi...

SS-113990006

Flyport WiFi Kit is a clever gadget attributed to openPicus. It integrates excellent abilities as WiFi wireless communication, instant Grove acce...

SS-113990005

BLE-Shield v3.0.0 based on Bluegiga’s BLE113 Module   The Bluetooth Low Energy (BLE) Shield v3.0.0 for Arduino is a Shield that enabled Arduino Pro...

SS-101990076

MK808 is designed to be plugged into a TV or a monitor via HDMI, allowing you to run Android apps on a big screen. You can connect a keyboard, mo...

SS-113990004

This sensor has two parts. The transmitting part has red wire and black wire. The red wire is 5V +. The black wire is 5V-. The receiving part has...

SS-101990073

Dragrove is an open source based generic gateway for internet of things. It combines Dragino (Easy Internet Access, powerful CPU, Linux system), ...

SS-113990003

WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for fa...

SS-113990002

EMW3162 WiFi Module(External IPEX antenna)is the new module that design by MXCHIP in the 2013. For the embedded products applications, it focus o...

SS-101990071

XBee-PRO DigiMesh 2.4 embedded RF modules utilize the peer-to-peer DigiMesh protocol in 2.4 GHz for global deployments. This innovative mesh prot...

SS-113990001

GestureR is a single tiny module that includes Gesture Sensing, Proximity Sensing, and Ambient Light Sensing, th...

SS-101990070

The XBee RF Modules were engineered to meet IEEE 802.15.4 standards and support the unique needs of low-cost, low-power wireless sensor networks....

SS-113990000

GestureR is a single tiny module that includes Gesture Sensing, Proximity Sensing, and Ambient Light Sensing, th...

SS-101990069

This product can now be purchased at www.ghielectronics.com.   The Bluetooth module enables Gadgeteer mainboards with a wireless connection to...

SS-113120001

This product can now be purchased at www.ghielectronics.com.   Digi international offers a verity of wireless modules in a standard form-facto...

SS-113120000

GestureR is a single tiny module that includes Gesture Sensing, Proximity Sensing, and Ambient Light Sensing, they brings you to your DIY devices...

SS-101990068

DISCONTINUED: This product has been discontinued, the page is available for reference and documentation.   Introduction: This is a Temperature sen...

SS-101990066

RedBearLab CC3200 WiFi board, is based on CC3200 module that is provided by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s fir...

SS-113110002

Introduction: The RaZberry turns every Raspberry Pi into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireles...

SS-113110001

Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularl...

SS-101990065

Planned Shipment Date:Dec  12, 2014 Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alt...

SS-101990064

This board breaks out all pins of the XBee to 2.54mm pitch.   You can add a bypass capacitor and/or LED indicators ("ON" and "Associate / AD5")...

SS-113100001

Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularl...

SS-101990063

The acrylic case is used for Beagle Bone, It’s made of acrylic sheet, Only 4 pieces sheets, in total. manufacture by laser cutting, CNC milling, ...

SS-113070001

Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularl...

SS-101990062

Basic Specification: Frequency: 315Mhz. Modulation: ASK Working voltage: 3-12VDC（Transmitter), 5VDC(Receiver) Receiver sensibility: -105dbm ...

SS-113060001

  Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particul...

SS-101990061

This kit is used for one way wireless communication at a frequency of 433MHz and includes a transmitter module and a receiver module. The twig co...

SS-113060000

Bluetooth Bee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection se...

SS-113050014

What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for meas...

SS-101990060

BLE (dual) Bee v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions, Users can develop flex...

SS-113050013

Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly ...

SS-101990059