SparkFun Australia

Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integra...

SF-COM-14086

These single channel 45 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share t...

SF-ROB-12138

This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with a...

SF-WRL-08742

Stay warm, outdoors! High quality hoodie with front pocket. Large logo on the front, blank back. If you’re shopping for the quintessential Americ...

SF-SWG-08741

These 7" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

SF-ROB-12137

Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integra...

SF-COM-14085

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12136

Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively...

SF-TOL-08734

These 5" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12135

These blue precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12134

The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that works with ...

SF-DEV-14083

Do not look into the light. You know you want to, but boy will you be sorry. 1W per channel, RGB High Power LEDs in one aluminum backed package. Th...

SF-COM-08718

Screw plates make it easy to create a strong joining point between our channel pieces. The ‘large’ screw plate is 1.3" square, has four 6-32 tapped...

SF-ROB-12133

These 2" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12131

The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that works with ...

SF-DEV-14082

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12130

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance chang...

SF-SEN-08713

This hub adapter lets you connect Actobotics parts with a 1.5" hub pattern to parts with a 1.5" hub pattern. The hole alternate between tapped and ...

SF-ROB-12129

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes ...

SF-SEN-08712

The E Style Motor mount connects to the inside of Actobotics channels and works with both standard and precision gear motors. This allows you to dr...

SF-ROB-14076

Screw plates make it easy to create a strong joining point between our channel pieces. Te small screw plate is 0.784" square, has 4 6-32 tapped hol...

SF-ROB-12128

The BLE Nano v2 from RedBearLab is one of the smallest Bluetooth 4.2/5.0 Low Energy (BLE) development boards in the market. At each BLE Nano’s core...

SF-WRL-14070

AVR-ISP500 is a fast and reliable USB AVR programmer, and works directly with AVR Studio. It is recognized as a STK500 programmer and programs all ...

SF-PGM-08702

This is a 10-pack of 20MHz resonators in a tiny SMD package. Resonators function like crystals but stick closer to their specified frequency over a...

SF-DD-14068

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12127

A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (all three pieces come as...

SF-DEV-08682

These heavy duty wheels have a diameter of 4” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels u...

SF-ROB-12124

This is the Bare Conductive Pi Cap, a small, shield-like device that adds precise capacitive touch, distance sensing and high-quality audio to your...

SF-DEV-14065

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000...

SF-SEN-08679

Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the laser...

SF-COM-08674

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versati...

SF-ROB-12120

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions...

SF-PRT-08671

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions...

SF-PRT-08670

These 4" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

SF-ROB-12118

These 12" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating t...

SF-ROB-12117

This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to us...

SF-WRL-08665

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12116

These un-threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secured safely. These cl...

SF-ROB-12114

A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to ‘scan’ the 7 output pins to see...

SF-COM-08653

The Modulo Invention Kit is a massive upgrade from its little sibling, the Gizmo Kit. The Invention Kit includes everything the Gizmo offers, plus ...

SF-KIT-14054

These 2" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tu...

SF-ROB-12113

The Modulo Gizmo Kit is an entry-level kit focused on education and playful exploration. It’s a great way to get started with Modulo without breaki...

SF-KIT-14053

The Spectacle Light Board allows you to add some fairly complex lighting effects to your Spectacle projects in a streamlined manner. Each has conne...

SF-DEV-14052

These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12112