Sunfounder Australia

Introduction This 7 inch IPS LCD Monitor with a high resolution of 1024×600 pixels supports key operation and remote control. It is protected by a ...

SU-7IPS

Introduction This 7 inch IPS LCD Monitor with a high resolution of 1024×600 pixels supports key operation and remote control. It is protected by a ...

SU-7IPS

Input part DC +: connected to positive power source (supply power according to the relay voltage) DC -: connected to negative power source CH1: 1-c...

SU-5V8CHANNELSOLIDSTATERE

IntroductionThis is a 4-channel HIGH level trigger relay, applicable to Arduino and Raspberry Pi, Relays are suitable for driving high power electr...

SU-5V4CH-RED

Input part DC +: connected to positive power source (supply power according to the relay voltage) DC -: connected to negative power source CH1: 1-c...

SU-5V2CHANNELSOLIDSTATERE

Input part DC +: connected to positive power source (supply power according to the relay voltage) DC -: connected to negative power source CH1: 1-c...

SU-5V1CHANNELSOLIDSTATERE

IntroductionDesigned for Raspberry Pi, the 5 inch HDMI display screen monitor holds a resistive touch screen with a resolution of 800x480. It suppo...

SU-5HDLCDSCR

Introduction The mini LCD screen display supports a resolution of 84*48. By the programming in Python, the Raspberry Pi can control the screen to d...

SU-51108448MINILCD

Package list: 1x 40-pin GPIO Cable  1x GPIO Adapter for Raspberry Pi B+

SU-40-PINGPIOEXTENSIONBOA

Features3.5 Inch Touch Screen Monitor with high definition, designed for Raspberry Pi. 480 x 320 resolution ratio, supports touch control.Compatibl...

SU-3.5LCDSCR

Features: GPIO expansion kits, contains 2 pieces 26-pin GPIO Cable GPIO Extension Board Breadboard is NOT included Raspberry Pi is NOT included Tec...

SU-26-PINGPIOBREAKOUTEXPA

Introduction Controlled by MCU, the EMO is a 24x8 LED dot matrix display module of white color. It obeys the protocol of SPI and will refr...

SU-24X8LEDDOTMATRIXMODULE

Specification Color: Silver  Material: Stainless Steel  Caliper Type: Digital Calipers  DIY Supplies: Metalworking  Model Number: YWL960TE  Measure...

SU-VERNIERCALIPER

IntroductionThe SunFounder HC-SR04 Ultrasonic Ranging module includes an ultrasonic transmitter, receiver and circuits. It has 4 pins: VCC, TRIG, E...

SU-ULTRASONICMODULEHC-SR0

Technical Details Introduction This mini-size Nano module integrates the PCF8563 RTC and DS18B20 temperature sensor. It works well with Raspberry P...

SU-TS0914

Introduction nRF24L01+ is a single-chip radio transceiver for the worldwide 2.4-2.5 GHz ISM band. The radio transmitters and receivers include freq...

SU-TS0820

Technical Details Introduction This 5-channel line follower module adopt ATMEGA328P microprocessor and change analog data get from five TCRT5000 se...

SU-TS0751

Introduction The BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an ex...

SU-TS0750

Introduction When you connect multiple PWM signal pins, most I/O ports of the control board will be occupied and PWM ports may then be insufficient...

SU-TS0736

Introduction The TB6612 Motor Driver Module uses TB6612FNG as the driver chip which has large current (1.2A continuous current) and two-channel out...

SU-TS0735

IntroductionSunFounder PN532 NFC RFID Module is a highly integrated transmission module for Near Field Communication at 13.56MHz. With the mode swi...

SU-TS0732

Introduction  When you have to deal with the audio, video or images in some projects, you will need a memory card to help you save these objects. A...

SU-TS0673

Introduction This PL2303 Mini USB to UART board is a converter module which is a perfect choice when you want to use a serial port for a module tha...

SU-TS0484

Introduction This module contains an ultrasonic sensor to detect the distance to an obstacle in front. It is usually used on robots to avoid obstac...

SU-TS0474

Introduction The TCRT5000 infrared photoelectric switch adopts a high transmit power infrared photodiode and a highly sensitive phototransistor. It...

SU-TS0472

Product Description Application  The relay module can be applied in an automatic control circuit, used as a module for MCU development boards, or a...

SU-TS0308

Application The module can be applied to power supply for electronic devices. When a 5v supply is needed, the module can be used to reduce the volt...

SU-TS0235

Application The expansion board integrates the pin sockets for Arduino Nano and NRF24L01, as well as a 2.5D joystick. With this board, you can make...

SU-TS0234

Introduction of L293D With a 16-pin DIP package, L293D integrates a bipolar H-bridge circuit internally. The bipolar PWM method has many advantages...

SU-TS0231

Application The module can be used in voltage divider, rheostat, current regulator, etc. More details can be found in WIKI. Component List - 1 x P...

SU-TS0227

Introduction The sound sensor has a built-in capacitive electret microphone which is highly sensitive to sound. Sound waves cause the thin film of ...

SU-TS0223

For more information, please refer to http://wiki.sunfounder.cc/index.php?title=Tilt_Switch_Sensor_Module Introduction The tilt switch module uses...

SU-TS0218

Introduction An obstacle avoidance sensor mainly consists of an infrared transmitter, an infrared receiver and a potentiometer. According to the re...

SU-TS0216

Introduction A switch Hall sensor module that is composed by a switch Hall sensor, resistor and capacitor in an integrated circuit. For your refer...

SU-TS0215

Application The module can be applied to temperature detection, temperature control sensor, and ambient temperature detection. More details can be ...

SU-TS0213

Introduction A photo-interrupter is a sensor that arranges light-emitting component and light-receiving component face-to-face and packages them to...

SU-TS0212