Sunfounder Australia

  Technical Details Introduction The PiCar-S is a cool smart car that can work with Raspberry Pi model B+, 2 model B and 3 model B. With three...

SU-PICAR-S

 Technical DetailsIntroductionThe PiCar-V is an open source robot learning kit based on Raspberry Pi. Equipped with a wide-angle USB webcam, it is ...

SU-PICAR-VSDPI

 Technical DetailsIntroductionThe PiCar-V is an open source robot learning kit based on Raspberry Pi. Equipped with a wide-angle USB webcam, it is ...

SU-PICAR-V

Introduction This is an EMAX ES08A II servo. It is super small in size and easy to mount and wire, with a durable shell. What’s more, the control ...

SU-ES08ASERVO

  Technical Details Introduction The PiCar-S is a cool smart car that can work with Raspberry Pi model B+, 2 model B and 3 model B. Wi...

SU-PICAR-SSDPI

Introduction The SunFounder Rollflash is a smart quadruped bionic robot built by acrylic plates. It mimics the tortoise because of its slow spee...

SU-BIONICTURTLE

Introduction RollbotMicro kit is a very interesting and suitable learning tool for Arduino and robot hobbyist. It has simple structure and runs PCB...

SU-ROLLBOTMICRO

Introduction This learning kit is based on the popular open source electronics platform Arduino. It is different from most popular kits on the mark...

SU-CRAWLINGV2.0

  Introduction The PiSmart is an intelligent platform based on the Raspberry Pi designed by SunFounder, integrating the Speech to Text (STT),...

SU-PISMART

Introduction The PiSmart is an intelligent platform based on the Raspberry Pi designed by SunFounder, integrating the Speech to Text (STT), (Tex...

SU-PISMARTWITHPI

Introduction This metal gear servo has a torque of as large as 13.5KG. It rotates from 0-180 degrees. You can control its gear to rotate to a certa...

SU-METALGEARDIGITALRC

Specification Diagonal wheelbase: 550mm Landing gear height: 260mm Weight: 630 ±2 g Material of the main board : 3k full carbon fiber  thickness of...

SU-FRAMEGEAR

Introduction The NEO-6M GPS module is a well-performing complete GPS receiver with a built-in 25 x 25 x 4mm ceramic antenna, which provides a stron...

SU-NEO-6MGPS

Introduction The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range and supe...

SU-CZ0091

Introduction Made of carbon fiber, the SunFounder SFX190 quadcopter frame boasts ultralight weight and anti-collision ability. It’s an X-shaped one...

SU-X190CFRAME

Introduction This FPV camera is a micro-size and ultra-lightweight all-in-one device, integrating a 5.8G 25mW image transmission module of 48 frequ...

SU-C02CAMERA

Introduction This FPV camera is a micro-size and ultra-light weight all-in-one device, integrating a 5.8G 25mW image transmission module of 48 freq...

SU-C01CAMERA

Technical Details Frame wheelbase: 67mm Material: PVC Color: Black and red Suitable for: Eachine E010, Blade Inductrix and Tiny Whoop Package Incl...

SU-E010FRAME

Introduction The SF Racing F3 flight controller is designed to provide flight experience of excellent performance for the hobbyists.  With verified...

SU-RACINGF3CONTROLLER

Introduction SF2205 Brushless Motors 1. Unique strong inflow design cools the motor during flight, thus enhancing efficiency. 2. Low gravity center...

SU-2205MOTOR20AESC

Features The SunFounder Q250 quadcopter is tailored for hobbyists and beginners for FPV flying.        It is a X-Shape quadcopter, more flexible ...

SU-SF-Q250

Introduction The BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an e...

SU-NAZEFLIGHT32

Introduction The I2C-GPS NAV module works with all 328P-based MWC flight controllers (with magnetic reluctance) to provide functions including GPS ...

SU-TS0510

Introduction  This JF-01 AIO FPV Camera is a multifunctional device. Internally, it adopts an 800TVL, FOV 148° wide-angle camera, 40-CH transmitter...

SU-JF-01CAMERA

Introduction This low-power-consumption and lightweight image transceiver kit with high resolution and strong signal is a best choice for mass FPV ...

SU-FPVIMAGE

Introduction SunFounder BEE-100S is a bee-like quadcopter with miniature and lightweight body especially designed for FPV flying hobbyists. It’s pa...

SU-BEE100S

Introduction SunFounder BEE-100 is a bee-like quadcopter with miniature and lightweight body especially designed for FPV flying hobbyists. It’s pal...

SU-BEE100

Introduction This device is a DC-DC power supply module designed for the APM 2.0/2.5/2.5.2/2.6/2.8 and Pixhawk. It supports both voltage and curren...

SU-TS0552

Introduction The 6D-Box Starter Learning Kit for aircraft model beginners is perfect for hobbyists who loves aircraft models but are not so equippe...

SU-6D-BOXII

Introduction The remote control adopt 6-ch 2.4GHz radio frequency transmitter, 6-ch receiver PPM signal mode thus possess fast transmission rate, s...

SU-6CHREMOTECONTROLLER

Introduction Made of high-quality plastic, the SunFounder 5045 three-blade propeller is quite lightweight but rather firm. It can provide favorable...

SU-3-BLADE5045

Specifications: Item name: Nano 6A ESC Suitable for: Remote control Aircraft Type of accessories: Electronic speed controller ESC input voltage: 1-...

SU-NANO6AESC

Specifications: Item: BLheli 20A Suitable for: Remote control Aircraft Type of accessories: Electronic speed controller  Color: Black & Red

SU-20AESC

Specifications: Technical details: Vertical Suitable for hook of 3mm-3.2mm thick Suitable for: Remote Control Aircraft Type of accessories: Remote ...

SU-BRACKETHOLDER

Specification Body Size: 155x144x113 (mm) Weight: 248g (battery not included) Working temperature: -10℃-80℃ Storing temperature: -20℃-90℃ Humanized...

SU-FPVGOGGLES

Introduction  The Flysky FS-i6X radio transmitter is quite powerful and its throttle is on the left. It uses a full-directional and double-gain ant...

SU-FS-I6X

Specifications: Module: F450 Suitable for: Remote Control Aircraft Wheelbase: 450mm Weight: 282g Color: 2black+2red arms，2black+2white arms，2red +2...

SU-F4504AXIS

Technical details Introduction The EF-01 AIO FPV camera realize 25mW 40ch 5.8GHz TX, circular polarization clover leaf antenna and great CCD killer...

SU-FPVMICROAIOCAMERA

Specifications: Item: Simon-6A  Suitable for: Remote control Aircraft Type of accessories: Electronic speed controller  Continuous Current: 6A  B...

SU-SIMON

Specifications: Suitable for: Remote Comtrol Aircraft Model number: 5MM for 1806/2204 motor, 6MM for 2212/2213 Technical details: CW in Silvery ,CC...

SU-CAPNUTS

Suitable for: Remote Control Aircraft Model number: 3.5MM Color: Gold Weight: 0.290kg Package Including: 1x Banana Plug Connector Male 1x Banana P...

SU-BANANAPLUG

Specifications: Item: Simon-20A  Suitable for: Remote control Aircraft Type of accessories: Electronic speed controller  Continuous Current: 20...

SU-SIMONK20A

Specifications: Model Number: D2212 920KV CW/CCW Suitable for: Remote Control Aircraft Type of accessories: Motor Silver motor: CW （without Banana ...

SU-MOTOR2212

Introduction This RadioLink Transmitter adopts the 2.4GHz FHSS 4-channel technology, supporting the helicopter mode and fixed wing mode. The transm...

SU-6DBOXREMOTECONTROL

Introduction The SF210 multirotor aircraft kit is tailored for the hobbyists for FPV flying. It runs the Nazeflight32, which is developed ...

SU-SF210

Specifications: Model: Q280 Suitable for: Remote Control Aircraft Wheelbase: 280mm Weight: Glass fiber)215g, (Carbon fiber)200g 3K carbon fiber (or...

SU-ROBOCAT

Specifications: Item: Simon-12A  Suitable for: Remote control Aircraft Continuous Current: 12A  Burst Current(10S): 15A  Weight: 9g  BEC Mode: Li...

SU-SIMONK12A