Tools

Having a broken phone or electronics device stinks, whether it's a screen going out, a cable becoming unplugged, or even a more severe issue that w...

SF-TOL-15255

Similar to our 28 compartment unit, this storage box can also be configured in a wide range of variations. The basic box has 6 compartments measu...

TB-HB6312

OverviewDeveloped as a quick starter board for the less experienced we envision this board as the follow up to your first soldering session.In isol...

LB-00061

Do you need to remove the oxidation and surface contamination from your soldering iron tip? The Solder Tip Polishing Bar allows you to do just that...

SF-TOL-14233

Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid, it helps remove baked on residue (for when you m...

SF-TOL-13246

IntroductionThe ESD Tweezers Tools Kit includes 9 tweezers with different sizes and pointy shapes. The come in a roll up carry case. Each tweezer i...

SU-CN0012

Digital calipers are an absolute essential. Here at SparkFun we use them all the time. These premium calipers come with an extra battery and auto s...

SF-TOL-10997

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right s...

SF-TOL-10865

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping g...

SF-TOL-09200

Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.

SF-TOL-08794

This parts kit allows you to modify a coolant hose into an additional hand for your SparkFun Third Hand. It includes the alligator clips and hardwa...

SF-TOL-12033

Note: This crimping tool is 3 mm narrower than our more versatile 0.1-1.0 mm² capacity crimper, and it does not crimp the full extent ...

PL-1929

When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility...

SF-TOL-09316

The Chip Quik No-Clean Liquid Flux Pen is great for all rework, solder, de-solder, and reflow applications! In particular this one is from the rewo...

AF-3468

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then ...

AF-2625

Is there something missing from your tool kit or workstation? Are you having trouble figuring out which elusive tool it is that you're lacking? Per...

AF-3434

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the ready ...

AF-3096

The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for h...

AF-291

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  Th...

AF-1649

Break seals! Void warranties! With this handy screwdriver set at your hands, all hardware you touch will open up and reveal their secret innards.Th...

AF-424

Looking for something for the little engineer in your life? The Makedo Toolkit is a starter kit of cardboard construction tools that's a great intr...

AF-3285

If you want to make a kit you'll need some solder. This 1/4 lb (about 110 gram) spool is just the right amount, not too much (like 1 lb spools) and...

AF-734

Doesn't this fixture clamp look like a character in a Pixar movie?  If you just drew two little eyes on it then you could just imagine it hopping a...

AF-2458

Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These High-Temperatu...

AF-3198

The Hakko 599B-02 tip cleaner is made from coils of brass, which is softer than the tip plating but harder than the oxidation that forms on the ti...

PL-2781

Traveling Nut for TR8×8(P2) Threaded Rod. When the nut is prevented from rotating, it travels up or down the rod as the motor rotates. ...

PL-2688

This lightweight (about 7.5 g) but strong bracket is made from 2mm-thick black anodized aluminum and is specifically designed to work with the...

PL-2257

PL-1960

PL-1957

Overview These M-F (male-female) aluminum standoffs are great for separating stacked components or chassis tiers. Each hexagonal standoff is ...

PL-1940

PL-1077

PL-1076

PL-1069

This super low profile driver is pocket sized and lets you work in really enclosed or restricted areas The low-profile head is only 22mm high, so y...

PI-DR-55

Rotate the head through 270° to make your work easier. The base will clamp to any bench or table up to 55mm thick and the 40mm jaws will take a jo...

TB-TH1769

Specification + Philips: PH000, PH00, PH0, PH1  - Straight Screwdriver (Slot Type): 1.5, 2.0, 2.5, 3.0mm Inner Hex: H1.3mm, H1.5mm, H2.0mm, H3.0mm,...

SU-31IN1SCREWDRIVER

The Adjustable PCB Clamp Holder from Pro's Kit is designed for larger, heavier PCB soldering and desoldering. But it works great for small boards t...

AF-3791

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, an...

AF-3658

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you ...

AF-3824

It seems like everything plugs in to your computer these days, and this digital multimeter is no exception. This auto-ranging multimeter will test ...

SF-TOL-12967

This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better...

SF-TOL-08964

Heard about locksport and want to try it for yourself? It's a fun hobby you can pick up easily (ha!). It's like a Rubik's cube but you have to work...

AF-3806

What should every hacker have available to them? That’s right, a screwdriver (you have to get into those cases somehow). What makes screwdrivers ev...

SF-TOL-12891

These are our new and improved flush cutters, giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, ...

SF-TOL-11952

The Panavise Jr. is a great vise with a vacuum base. Its jaws open up to about 3" and have grooves for PCBs. It’s perfect for light duty field repa...

SF-TOL-10410

If you use your hobby knife a lot, chances are you will need extra blades. These #11 blades are very sharp and good for trimming all sorts of thing...

SF-TOL-10325

These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good...

SF-TOL-14782

Aavid Thermalloy Theragrip is a double sided tape for ceramic or metal heatsink packages. Theragrip provides both good thermal performance and exce...

SF-PRT-09771