Pololu

Clearance: This product is on clearance and will be discontinued when stock runs out. We recommend the Power HD High-Torque Servo 1501MG as a rep...

PL-1054

High-Traction Sticky Tire on Futaba servo wheel. These high-traction sticky tires (also known as gummy tires) are a great way to give additi...

PL-694

Fine-tip soldering iron included with the hot air rework station. Overview This hot air rework station comes with a heat gun, four nozzles, ...

PL-1626

Overview This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement high-power (HP) 12 V motor ...

PL-3212

This is the motor and encoder portion of our high-power (HP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but ...

PL-4840

Overview This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement high-power (HP) 6 V motor w...

PL-2269

Overview The Hydra is a triple-output power converter from CH Robotics designed to make it easier to get the power you need for your next proj...

PL-2589

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. This robot kit is desi...

PL-80

Antoid Overview The iBOTZ Antoid is a unique, beginner-level robot kit that features one of the most basic functions found in autonomous robot...

PL-81

The iBOTZ MR-1004 Hydrazoid has been discontinued. Please consider one of our other robot kits. Hydrazoid Overview The iBOTZ Hydrazoid is a go...

PL-82

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. Tribotz Overview T...

PL-83

These connectors can be crimped onto ribbon cable to make custom cables that match our 2×3-pin shrouded male header: Shrouded 2×3-pin box header...

PL-855

Discontinuation notice: This charger has been replaced by the newer iMAX B6AC V2, which adds several new features along with improved accuracy and...

PL-2260

Overview The iMAX B6AC V2 is a highly versatile, rapid battery charger, discharger, and balancer from SkyRC. It works with NiMH, NiCd, Pb, LiPo,...

PL-2588

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-358

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-359

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-224

Overview The industrial-grade Torxis high-torque servos by GearWurx (formerly know as Invenscience) are available in two different gear ratios tha...

PL-1390

Overview The industrial-grade Torxis high-torque servos by GearWurx (formerly know as Invenscience) are available in two different gear ratios tha...

PL-1391

ISD1932 voice recorder carrier top view. ISD1932 voice recorder carrier bottom view. Overview This breakout board from SparkFun is a carr...

PL-1619

Overview This I²C extender board from SJTbits greatly expands the operational distance of an I²C (TWI) bus by transparently bridging the conne...

PL-2159

This servo elbow joint kit allows you to connect two Joinmax Digital servos to create an elbow joint as shown to the right. The same set of p...

PL-91

This robotic gripper kit is the same gripper that is used in the Joinmax Digital Hexapod Monster and Robot Arm, except that it is gray instead...

PL-93

This excellent kit from Joinmax Digital includes all of the components you need to create a six-legged, walking robot. Each of the six legs h...

PL-98

This excellent quadruped robot kit includes all of the components you need to build your own four-legged, walking robot. Each leg has two degrees ...

PL-96

Overview This robotic dog kit includes all of the components you need to build your own robot dog. In total, this robot has 15 degrees of free...

PL-95

We carry a wide variety of servos, from ultra-high-torque monster servos with up to 1600 oz-in of torque, to sub-micro servos weighing less t...

PL-94

The shoulder joint set contains enough parts to connect three Joinmax Digital servos to create a shoulder and elbow joint identical to the one...

PL-92

This robotic arm kit includes all of the components you need to build your own robot arm. Seven servos provide six degrees of freedom, allowing yo...

PL-97

This JR connector has a 0.1" pin spacing and is commonly used on RC servos. Two corners are slightly beveled, which makes it difficult (but not i...

PL-1924

This JR connector has a 0.1" pin spacing and mates with the female JR connectors commonly found on RC servos. The corresponding female JR connecto...

PL-1925

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers...

PL-3146

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controlle...

PL-3148

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controlle...

PL-3142

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controlle...

PL-3143

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers...

PL-3147

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers m...

PL-3149

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-1934

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-1935

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2180

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2181

Discontinuation notice: This board has been replaced by the newer L3GD20 carrier, which uses a higher resonant frequency that makes it more resist...

PL-1272

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s L3GD20H three-axis digital-output gyroscope; we therefore recommend car...

PL-2129

Click here to get a quote and place your order What we offer: cheap stencils for electronics prototyping Close-up of a mylar solder paste st...

PL-446

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LIS3MDL three-axis digital magnetic sensor; we therefore recommend care...

PL-2737

Note: ST has discontinued the LISY300AL IC, so this product has been discontinued. Please consider our dual-axis gyros as replacements. Overv...

PL-765