pololu

Note: This has been replaced by a higher-capacity battery pack with a different style of connector. Connector This battery pack comes with 3"...

PL-1175

Note: This has been replaced by a higher-capacity battery pack with a different style of connector. Connector This battery pack comes with 3"...

PL-1009

Connector This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connect...

PL-2236

Overview This ball caster can be used as a replacement 3pi robot part or as a general-purpose ball caster. When mounted through a hole in a c...

PL-957

PL-3434

Overview Our replacement sprockets for the Zumo robot are available in red and white and can be used in place of the black sprockets included with...

PL-3128

Overview Our replacement sprockets for the Zumo robot are available in red and white and can be used in place of the black sprockets included with...

PL-3129

Satellite Module 001 bottom view. This satellite module is a balanced array of 4 red, 3 blue, and 3 green LEDs, each of which supplies ~35,0...

PL-1243

Using an OctoBrite to control the color and brightness of multiple satellite modules. The 003 and 004 satellite modules from Macetech have ...

PL-1235

Overview The RN-41 Bluetooth module is designed to replace serial cables; the Bluetooth stack is completely encapsulated. Using the TX and RX ...

PL-2160

New version available: This product has been replaced by the RN-41 Bluetooth Module Carrier. This product has firmware version 4.77. The replace...

PL-1613

Note: These controllers have been replaced by the RoboClaw 2x15A with USB (V4) and RoboClaw 2x30A with USB (V4). Overview The RoboClaw from Basic ...

PL-1496

Note: This product has been replaced by the Roboclaw 2x15A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1493

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2395

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3285

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2392

The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They ...

PL-3582

Note: These controllers have been replaced by the RoboClaw 2x15A with USB (V4) and RoboClaw 2x30A with USB (V4). Overview The RoboClaw from Basic ...

PL-1497

Note: This product has been replaced by the Roboclaw 2x30A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1494

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2396

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3286

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2393

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2397

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3287

This controller has been replaced by the RoboClaw 2x5A (V4). Compared to this version, the new RoboClaw has some physical differences (e.g. smalle...

PL-1495

This controller has been replaced by the RoboClaw 2x5A (V5). Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficie...

PL-1492

Note: This RoboClaw 2x5A has been replaced by the slightly improved 2x7A. The 2x7A can supply up to 7.5 A continuous and 15 A peak, up from 5 A a...

PL-2394

This controller has been replaced by the RoboClaw 2x60A with USB (V4). It has a new board design and some new features like USB connectivity, but...

PL-1498

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-1499

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3289

The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They ...

PL-3292

The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They ...

PL-3583

Overview Note: This RoboClaw 2x7A (V5) has been replaced by the slightly improved 2x7A (V5B), which features a more powerful BEC regulator capabl...

PL-2399

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3284

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3290

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-3291

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-2398

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC. D...

PL-1406

Overview The Romi 32U4 Control Board is designed to be assembled with a Romi chassis to create a capable integrated robot platform that can ea...

PL-3544

OverviewThis expansion plate makes it easy to add more levels to your Romi robot, providing plenty of extra room to mount additional components and...

PL-3560

Note: This chassis has been discontinued. As an alternative, please consider the Dagu Rover 5 tracked chassis or our Zumo tracked chassis. Overvi...

PL-1060

Note: This chassis has been discontinued. As an alternative, please consider the Dagu Rover 5 tracked chassis or our Zumo tracked chassis. Overvi...

PL-1059

Discontinuation notice: This product has been discontinued. We recommend the much newer DRV8835 dual motor driver carrier as a higher-performance...

PL-399

Bipolar stepper motor wires are terminated with bare leads. Sanyo bipolar stepper motor wiring diagram. Overview This tiny bipolar steppi...

PL-2294

Bipolar stepper motor wires are terminated with bare leads. Sanyo bipolar stepper motor wiring diagram. Overview This tiny bipolar stepping...

PL-2295

Bipolar stepper motor wires are terminated with bare leads. Sanyo bipolar stepper motor wiring diagram. Overview This NEMA 17-size pancak...

PL-2278

Bipolar stepper motor wires are terminated with bare leads. Sanyo bipolar stepper motor wiring diagram. Overview This NEMA 17-size pancak...

PL-2279