Freetronics

Light up your Arduino and Raspberry Pi display needs with this high resolution, full colour OLED display module! Perfect for graphics, gauges, grap...

FT-OLED128

This product has been replaced by the 16x2 LCD & Keypad Shield This simple shield gives you a 16-character by 2-line display and some handy in...

FT-SH-16X2LCD-KIT

This handy ruler is perfect for your electronics bench: designed specifically for electronics engineers, it includes 1mm graduations on one edge an...

FT-RULER

This 2-wheel-drive chassis kit is easy to assemble, and can be combined with other parts to build your own little robot. Requires minor soldering ...

FT-ROBOT2WD

Which way is up?This tiny 3-axis accelerometer module can operate in either +/-1.5g or +/-6g ranges, giving your project the ability to tell which ...

FT-AM3X

Power-over-Ethernet uses your LAN to send power via the network cable to whatever device you have connected at the other end, saving you the hassle...

FT-INJ4CH

Power-over-Ethernet uses your LAN to send power via the network cable to whatever device you have connected at the other end, saving you the hassle...

FT-INJ4SS

Easily drive up to 4 relays using logic-level outputs from your Arduino or other microcontroller. Isolates your microcontroller from the relay coil...

FT-RELAY4

This product has been superseded by the Receiver Shield 315MHz / 433MHz. Click here for the new model. This page is left for reference only, and th...

FT-SH-433MHZ-RX

This stunning 3D-matrix of 64 RGB LEDs incorporates an onboard Arduino-compatible controller so you can produce mesmerising light shows controlled ...

FT-CUBE4

If you have damaged your 4x4x4 RGB LED Cube during assembly or need to replace the USB controller board - then order this pack to repair your cube....

FT-CUBEM

Drive up to 8 relays from your Arduino using just 2 I/O pins with this shield. It communicates with your board using I2C, so you can even stack sev...

FT-RELAY8

Huge 8mm RGB (Red Green Blue) LEDs in a 4-pin package with a common anode connection. Great for building colourful displays or status indicators th...

FT-RGB8CA

If you have damaged your 4x4x4 RGB LED Cube during assembly or need to replace some LEDs then order this pack to repair your cube. We also offer th...

FT-RGB8CC

Combining an accelerometer, a magnetometer, and a gyroscope all in one tiny package with an Arduino-friendly I2C interface. Perfect for building a...

FT-IMU9

Addressable LEDs such as FreePixels are great for chaining a bunch of LEDs together and driving them with a single data pin from your microcontrol...

FT-FREENFET

Addressable LEDs such as FreePixels are great for chaining a bunch of LEDs together and driving them with a single data pin from your microcontrol...

FT-FREENFET3

Build your own cellphone! Based on the ATmega1284P, ArduPhone lets you build mobile phone functionality into your Arduino projects or even to use a...

FT-PHONE

The ArduSat Arduino Adapter Module (ASAAM) lets you quickly and easily connect any regular Arduino-compatible board into a CubeSat satellite stack....

FT-ASAAM

The most powerful Arduino-compatible board in the world (or out of it!) has now landed. Use it to build your own satellite for your classroom or ha...

FT-ASPPM

A fully self-contained Arduino-Uno compatible board, in CubeSat format ready to build your own satellite! Note: battery not included due to shippin...

FT-ASPSM

This is the board that was used to hand-assemble early prototypes of the first two ArduSat satellites that went into space in 2013. We have a small...

FT-ASPM

This is the same Atmel AVR ATmega328P microcontroller used in the official Arduino Uno, as well as our Eleven, EtherTen, USBDroid, and other boards...

FT-ATMEGA328P

A highly sensitive barometric pressure sensor for weather, industrial, rocketry, balloon, and many other pressure sensing applications. The sensor...

FT-BARO

Adding Bluetooth to your project is easy with this simple module that fits in an XBee socket. It operates at 3.3V, the same as XBee modules, and it...

FT-BEEBLUE

A huge dot matrix LED panel to connect to your Freetronics Eleven, EtherTen and more! This large, bright 512 LED matrix panel has on-board control...

FT-DMDBLUE

Want to communicate with your Arduino wirelessly? Don't want the complication of WiFi? Our Bluetooth Shield plugs right in and lets you send and r...

FT-BTSH

This handy wall chart is a great quick-reference guide for your workshop or hackerspace. Printed on heavy-grade glossy card in A3 size (297x420mm),...

FT-CHARTCAP

The CNCPlotter is a complete, self-contained Arduino Leonardo compatible board with 2 onboard stepper motor drivers. The board was designed by Luke...

FT-CNCPLOT

Normal hobby servos only rotate about 180 degrees. That's perfect for most applications, but sometimes it can be useful to have a servo that will t...

FT-CONTSERVO

DC hobby motor with a 48:1 gearbox and a 66mm wheel. Ideal for small robotics projects, such as a SimpleBot or other car type design. Easy to contr...

FT-WHEEL

This handy Dot Matrix Display Connector allows you to plug an LED panel straight in to an Arduino-compatible board. Our big, bright LED panels co...

FT-DMDCON

Our Dual Channel H-Bridge Motor Driver Shield is perfect for driving either a pair of DC motors or a 4-wire bipolar stepper motor.Features Allegro ...

FT-HBRIDGE

This sensor incorporates two QRE1113 infra-red reflectance sensors on a single PCB, spaced just the right distance apart to build a line following ...

FT-REFLECT

The "Eleven" is just like an Arduino Uno – but better!It is based on the existing Arduino Uno but with improvements and updates for ease of use, co...

FT-ELEVEN