Click or scroll to zoom
Tap or pinch to zoom
Measure temperature and relative humidity using a simple interface that requires just three wires to the sensor: GND, power, and data. Supported by an Arduino library that makes it very easy to read values into your project, so with a single I/O line from your microcontroller you can read both temperature and humidity.
* -4°C to +125°C temperature range with +/-0.5°C accuracy
* 0-100% relative humidity with 2-5% accuracy
* 0.5Hz sample rate (one sample every 2 seconds)
* 3 to 5V operation
* Power consumption just 4.3mA during reads, even less when idle
* Blue power LED
* Dimensions: 31(W) x 23(H) x 4(D)mm
Support
Email: support@freetronics.com
* -4°C to +125°C temperature range with +/-0.5°C accuracy
* 0-100% relative humidity with 2-5% accuracy
* 0.5Hz sample rate (one sample every 2 seconds)
* 3 to 5V operation
* Power consumption just 4.3mA during reads, even less when idle
* Blue power LED
* Dimensions: 31(W) x 23(H) x 4(D)mm
Support
Email: support@freetronics.com
| Width | 31mm |
| Height | 23mm |
| Depth | 4mm |
| Required Supply Voltage | 3V |
| Sensor Outputs | 1 wire protocol (not Dallas one-wire) |
Warranty: 3 Months
