Click or scroll to zoom
Tap or pinch to zoom
MG995 StandardServo Pack contains a MG995 standard servo, a Servo Hub, a servo bracket and some hardwares. MG995 servo is a simple, commonly used standard servo for your mechanical needs. It comes with a stardard 3 pin power and control cable for easy using. With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. A Me RJ25 Adapter also help you to connect the servo with Me Orion easily.
PartList:
MG995 Standard Servo x 1
Servo Bracket A x 1
Screw M4*8 x 4
MG995 Servo hub x 1
Servo Specification:
Mechanical Specification:
| Item | Specification |
| Size | 40.4*19.9*37.5mm |
| Weight | 58g |
| Gear type | 5 Metal Gear |
| Limit angle | 180°±5° |
| Bearing | DUAL BB |
| Horn gear spline | |
| Horn type | Metal |
| Case | Engineering plastics(Polyamide) |
| Connector wire | FP: 240mm±5mm JR: 300mm±5mm |
| Motor | DC motor |
| Splash water resistance | No |
Electrical Specification:
| Item | Specification |
| Operat voltage | 4.8V |
| Idle current | 5mA |
| No load speed | 0.17sec/60° |
| Runnig current | 350mA |
| Peak stall torque | 9.0kg.cm |
| Stall current | 1500mA |
Control Specification:
| Item | Specification |
| Command signal | Pulse width modification |
| Amplifier type | Digital controller |
| Pulse width range | 500～2500usec |
| Neutral position | 1500usec |
| Running degree | 180±2°(when 500～2500usec) |
| Dead band width | 4 usec |
| Rotating direction | Counterclockwise (when 500～2500usec) |
